RECORDING
1.Press the n button to turn the power on.
2.Set the REC MODE switch (back of the unit) to select the desired recording mode.
DIC (Dictating): “ ” appears.
CONF (Conference): “ ” appears.
LECT (Lecture): “ ” appears.
Note:
If an external microphone (not supplied) is connected, the recording mode cannot be changed. “ ” appears.
3.Select the desired folder name, VAS and recording time modes. (See
“SELECTING THE MENU MODE”.)
4. Press the m button (red). Recording starts with new file number.
Example: The display appears as shown below.
Folder name
Current file number | Total file number |
Elapsed recording time
5. Press the n button to stop the recording at any time.
Note:
•The unit can record up to file number 99 for each folder (except ALARM folder).
•When the recording time is full, “MEMORY FULL” appears briefly. In this case, erase the unnecessary file.
9