POWER SUPPLY
Batteries
1.Open the battery compartment lid.
2.Install two “AAA” batteries. Observe proper polarity.
1 | 2 |
Fig. 3
Battery indicator ( )
The line of rectangles is the battery gauge. Black rectangles show the battery condition.
: Full, good condition
or (“LOW BATT” appears.): Weak or exhausted batteries, must be replaced.
CAUTION:
Remove the batteries if the unit will not be used for a month or longer.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DIS- POSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.
AC adaptor
Connect the AC adaptor (SANYO Model No.
•The center pin of the EXT DC 3V jack is positive (+).
4