JBL DSC 800, DSC 400 Changing the Password, Returning to the Original Factory Default Settings

P R E F E R E N C E S S E T U P

Changing the Password

Path: Main Page ➞ Preferences ➞ Password ➞ Change

To change the password from the original factory setting of "3308", follow the path shown above to select the "Change" heading. Press ENTER for the "Password Change Page".

Use the number keys on the remote to enter the old password "3308". Only "XXXX" will appear as you enter the numbers. If you enter an incorrect password, the "XXXX" will disappear from the "Input Password" box and you must enter the correct password.

Then enter a new 4-digit password in the "New Password" box. Enter it again in the "Confirm Pwd" box. Press ENTER once more to confirm your new password.

•To avoid locking forever, you must memorize and remember your password!

Please make a note of your new password:

Returning to the Original Factory Default Settings

Path: Main Page ➞ Preferences Page ➞ Defaults

PARENTAL

DEFAULTS RESET

N O_PA R EN TA L

LOAD FACTORY SETTINGS

Select “RESET” and then press ENTER button.

All of the items in the SETUP menu will return to their original default settings.The default selections are shown and underlined on page 26.

Note:

The password will not be reset, that´s why it is most important that you memorize and remember your password.

After the Default Reset has been made, all settings you have made and want to activate again must be re-entered.

.

33