Sanyo POA-LN01 appendix Mail Setting, Smtp Server*1, Administrator Address

Page 26

Basic Setting and Operation

E-mail Setting

This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the monitor or when the panel usage time reaches to setting time. Press the E-Mail Setting button on the main menu and follow the below steps.

1 E-mail Setting

Select "E-mail Setting" of sub menu, type below items, and press the Set button for set- ting.

1-1 SMTP Server*1

Type the address of SMTP server for E-mail.

1-2 Administrator Address

Type the E-mail address of administrator. This address is set to "Reply-To" address sent from the monitor.

1-3 Registering and deleting E-mail addresses

Type the E-mail address to which an alert message is sent.

*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to have this SMTP server address.

✐To use the E-Mail function, it must be set the DNS address on the Network Setting page correctly.

✐You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net- work environment. If the SMTP server is located in your LAN (Local Area network), the address set to SMTP server should be specified the in SMTP server located in your LAN. The server located outside of your LAN may not be available for security reason. For further information please contact your network administrator.

26

Image 26

Contents PJ-Net Organizer OWNERʼS ManualFederal Communication Commission Notice PreparationCompliance TrademarkExpression/Abbreviation Use of this manualContents Mail Alert function FeaturesWeb Management function Recommended Operating Environment Installation Installation p.10-12 InstallationFlow of installation Network configuration p.13-19Name and function of each part LCD MonitorMounting Up Down Position Position Connection of LAN cable Network configuration Procedure of Connecting the monitor to the networkConfigure the network with the computer DNSCompleting of installation Flash Player Configure the network of computer WindowsWindows XP Installation Page Basic Setting and Operation Login Basic Setting and OperationLogin the setting page of the monitor Enter the IP addressDisplay of setting Initial Settings Password SettingConfigure the network Setting the model IDAdministrator Address Mail SettingMail Setting Smtp Server*1Mail Check and Delete Option Condition selection for sending alert messageExamples Type and contents of alert mail Trap Send Setting Trap Snmp SettingLCD Information Setting Snmp Agent Trap Check and Delete Trap Option Selection for sending alert messageControlling the Monitor Status Controlling the MonitorCheck the status of monitor Child Lock Key Lock of Monitor Power Control the monitorWide Mode InputOther Use other command Make a memoPage Serial Port Use Example of Connection Specification and Setting of RS232C TerminalSerial Port Use Command for controlling the monitor Example Power on C00How to set Network configuration on network board to default Appendix Direct connection AppendixExamples of Connection Gateway Router installed in the network Meeting RoomProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Not using proxy server Proxy settingUsing proxy server Product specification Applicable monitor modelPin modular connector RJ-45 Port SpecificationLAN port specification MAC AddressPage Part No 333 5582 1AA6P1P5387-- Iffna