Sanyo POA-LN01 appendix Appendix, Examples of Connection, Direct connection

Page 44

Appendix

Examples of Connection

Direct connection

Connect the monitor (LCD01) to the control computer (PC05) directly.

Computer Name: PC05

IP Address	: 192.168.0.5
Subnet Mask	: 255.255.255.0
Default Gateway	:
DNS	:

Monitor Name: LCD01

IP Address	: 192.168.0.2
Subnet Mask	: 255.255.255.0
Default Gateway	: 0.0.0.0
DNS	: 0.0.0.0	* UTP cross cable
		* UTP cross cable

Connect the monitor (LCD01) to the control computer (PC05) via the hub.

Hub

Computer Name: PC05

IP Address	: 192.168.0.5
Subnet Mask	: 255.255.255.0
Default Gateway	:
DNS	:

Monitor Name: LCD01

IP Address	: 192.168.0.2
Subnet Mask	: 255.255.255.0
Default Gateway	: 0.0.0.0
DNS	: 0.0.0.0

UTP straight cable

Computer Name: PC10

IP Address	: 192.168.0.10
Subnet Mask	: 255.255.255.0
Default Gateway	:
DNS	:

✐When the monitor is connected to the computer directly without hub, the UTP cross cable should be used .

44

Image 44

Contents PJ-Net Organizer OWNERʼS ManualPreparation ComplianceFederal Communication Commission Notice TrademarkExpression/Abbreviation Use of this manualContents Mail Alert function FeaturesWeb Management function Recommended Operating Environment Installation Installation Flow of installationInstallation p.10-12 Network configuration p.13-19Name and function of each part LCD MonitorMounting Up Down Position Position Connection of LAN cable Network configuration Procedure of Connecting the monitor to the networkConfigure the network with the computer DNSCompleting of installation Flash Player Configure the network of computer WindowsWindows XP Installation Page Basic Setting and Operation Basic Setting and Operation Login the setting page of the monitorLogin Enter the IP addressDisplay of setting Initial Settings Password SettingConfigure the network Setting the model IDMail Setting Mail SettingAdministrator Address Smtp Server*1Mail Check and Delete Option Condition selection for sending alert messageExamples Type and contents of alert mail Trap Send Setting Trap Snmp SettingLCD Information Setting Snmp Agent Trap Check and Delete Trap Option Selection for sending alert messageControlling the Monitor Status Controlling the MonitorCheck the status of monitor Child Lock Key Lock of Monitor Power Control the monitorWide Mode InputOther Use other command Make a memoPage Serial Port Use Example of Connection Specification and Setting of RS232C TerminalSerial Port Use Command for controlling the monitor Example Power on C00How to set Network configuration on network board to default Appendix Direct connection AppendixExamples of Connection Gateway Router installed in the network Meeting RoomProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Not using proxy server Proxy settingUsing proxy server Product specification Applicable monitor modelPort Specification LAN port specificationPin modular connector RJ-45 MAC AddressPage Part No 333 5582 1AA6P1P5387-- Iffna