Sanyo POA-LN01 appendix Flow of installation, Check package p.9, Installation p.10-12

Page 8

Installation

Flow of installation

The following are instructions for attaching this product to the monitor and connecting it to the network. Please review the entire procedure to become familiar with it.

1Check package (p.9)

Please check the contents of a package. This product contains a network board, and an ownerʼs manual (this manual). Also please check the name and function of each part.

2Installation (p.10-12)

1.Mount this product onto the monitor and connect the interface cable between this product and the monitor.

2.Set the option switch on the monitor to down (Net-Organizer mode).

3.Connect the LAN cable and join it to the network.

3Network configuration (p.13-19)

Configure the network with the computer.

Setting up is completed.

The preparation is completed to control the monitor connected to the network. At next step, set up and control the monitor via the network by using the web browser installed on your computer. Please see “Basic setting and operation” on page 21.

8

Image 8

Contents PJ-Net Organizer OWNERʼS ManualPreparation ComplianceFederal Communication Commission Notice TrademarkExpression/Abbreviation Use of this manualContents Mail Alert function FeaturesWeb Management function Recommended Operating Environment Installation Installation Flow of installationInstallation p.10-12 Network configuration p.13-19Name and function of each part LCD MonitorMounting Up Down Position Position Connection of LAN cable Network configuration Procedure of Connecting the monitor to the networkConfigure the network with the computer DNSCompleting of installation Flash Player Configure the network of computer WindowsWindows XP Installation Page Basic Setting and Operation Basic Setting and Operation Login the setting page of the monitorLogin Enter the IP addressDisplay of setting Initial Settings Password SettingConfigure the network Setting the model IDMail Setting Mail SettingAdministrator Address Smtp Server*1Mail Check and Delete Option Condition selection for sending alert messageExamples Type and contents of alert mail Trap Send Setting Trap Snmp SettingLCD Information Setting Snmp Agent Trap Check and Delete Trap Option Selection for sending alert messageControlling the Monitor Status Controlling the MonitorCheck the status of monitor Child Lock Key Lock of Monitor Power Control the monitorWide Mode InputOther Use other command Make a memoPage Serial Port Use Example of Connection Specification and Setting of RS232C TerminalSerial Port Use Command for controlling the monitor Example Power on C00How to set Network configuration on network board to default Appendix Direct connection AppendixExamples of Connection Gateway Router installed in the network Meeting RoomProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Not using proxy server Proxy settingUsing proxy server Product specification Applicable monitor modelPort Specification LAN port specificationPin modular connector RJ-45 MAC AddressPage Part No 333 5582 1AA6P1P5387-- Iffna