Sanyo PLC-WU3800 Image is distorted or runs off, PIN code dialog box appears at start-up

Appendix

The image is distorted or runs off..	– Check PC adjustment or Screen and adjust them.
	See pages 32-33, 36-37 .

PIN code dialog box appears at start-up..

–PIN code lock is being set. Enter a PIN code ("1234" or numbers you have set). See pages 20, 57-58.

The Remote Control does not work..	– Check the batteries.
	– Make sure no obstruction is between the projector and remote
	control.
	– Make sure you are not too far from the projector when using the
	remote control. Maximum operating range is 16.4'(5 m).
	– Make sure the code of the remote control is conformed to the
	projector’s code. See page 56.
	– Unlock the Key lock function for the remote control function. See
	page 56.
Indicator blinks or lights..	– Check the status of the projector with referring to "Indicators and
	projector Condition". See page 73.

The exclamation mark appears on the screen..

– Your operation is invalid. Operate correctly.

Top control does not work..

–The top control is not available if the top control is locked at Key lock under Security of Setting section. See page 57.

Unable to unlock the Logo PIN code lock, Security key lock or Security PIN code lock..

–Contact the dealer where you purchased the projector or the service center.

69