Sanyo PLC-WU3800 ① Select button, ② Point Volume +/- buttons, ③ Menu button, ④ Auto Setup button

Part Names and Functions

Top Control

⑩	⑥
⑨	⑤
⑧	④
⑦	③
	②
	①

①SELECT button

–Execute the selected item (p.22).

–Expand or compress the image in the Digital zoom mode (p.37).

②POINT ▲▼◄► (VOLUME +/–) buttons

–Select an item or adjust the value in the On-Screen Menu (p.22).

–Pan the image in the Digital zoom + mode (p.37).

–Adjust the volume level (Point ◄► buttons) (p.25).

③MENU button

Open or close the On-Screen Menu (p.22).

④AUTO SETUP button

–Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu (pp.24, 46).

⑤POWER indicator

–Lights red when the projector is in stand-by mode.

–Lights green during operations.

–Blinks green in the Power management mode (p.53).

⑥WARNING indicator

–Lights red when the projector detects an abnormal condition.

–Blinks red when the internal temperature of the projector exceeds the operating range (pp.62, 73).

⑦KEYSTONE button

Correct keystone distortion (pp.24, 47).

⑧INPUT button

Select an input source (pp.28-29, 38-39).

⑨ON/STAND–BY button

Turn the projector on or off (pp.19-21).

⑩LAMP REPLACE indicator

Lights yellow when the projection lamp reaches its end of life (pp.65, 73).

11