Sanyo PLC-WU3800 Keystone, Background, Display, Countdown Off, Power off? p.21, Please wait

Setting

Keystone
This function is used to store or reset the keystone	Keystone
correction when the AC power cord is unplugged. Use the
Point ▲▼ buttons to switch between each option.
Store........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point ▲▼ buttons
to correct keystone distortion (p.24).
Background
Select the background screen for when no input signal is
detected. Press the Point ▲▼ buttons to switch between
each option.
Blue . . Blue colored background.
User . The image you captured.
Black . Black colored background.

Display

This function decides whether to display On-Screen

Displays.

On	Show all the On-Screen displays.
	Use this function when you want
	to project images after the lamp
	becomes bright enough. The factory
Countdown Off	default setting is in this option.
	Show the input image instead of
	the countdown when turning on the
	projector. Use this function when you
	want to project the image as early as
	possible even when the lamp is not
Off	bright enough.
	Hide the On-Screen Displays except;
	● On-Screen Menu
	● Power off? (p.21)
	● No signal for Power management
	(p.53)
	● Please wait
	● Arrows for the True function in the
	Screen Menu (p.36)
	● P-Timer

47