Sanyo PDG-DSU30 owner manual Troubleshooting, Problem No image appears on screen

Appendices

Troubleshooting

If you experience trouble with the projector, refer to the fol- lowing information. If the problem persists, please contact your local dealer or service center.

Problem: No image appears on screen

Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.

Ensure the pins of connectors are not crooked or broken.

Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section.

Make sure you have removed the lens cap and the projector is switched on.

Ensure that the “AV-MUTE” feature is not turned on.

Problem: Partial, scrolling or incorrectly displayed image

Press “AUTO ADJ.” on the remote control.

If you are using a PC:

For Windows 95, 98, 2000, XP:

1.From the “My Computer” icon, open the “Control Panel” folder, and double click the “Display” icon.

2.Select the “Settings” tab

3.Click on the “Advanced Properties”.

For Windows Vista:

1.From the “My Computer” icon, open the “Control Panel” folder, and double click the “Appearance and Personalization”

2.Select “Personalization”

3.Click “Adjust screen resolution” to display “Display Settings”. Click on the “Advanced Settings”.

If the projector is still not projecting the whole image, you will also need to change the monitor display you are using. Refer to the following steps.

33

English

English