Do not put the projector in a case before the projector is cooled enough.
-
Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult your dealer for their information.
-
When carrying the projector, use a suitable carrying case.
-
Do not drop or bump the projector, otherwise damages or malfunctions may result.
-
USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the cabinet.
Moving the Projector
6˚
6˚
Do not pitch the projector more than 6 degrees backward and forward.
- Do not touch a peripheral part of the
exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.
- Do not put anything on the cabinet.
Objects put on the cabinet will not only get When moving the projector, replace the lens damaged but also cause fire hazard by cap and retract the elevator foot to prevent
heat.damage to the lens and cabinet. When the Cooling fans are provided to cool down the projector is not in use for an extended period, projector. The fans’ running speed is changed put it into a suitable case with the lens side up according to the temperature inside the to protect the projector.
projector.
- Keep the exhaust vent at least 90 cm away from any objects.
Do not put the projector on either side to project an image.
- Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.
Do not point the projector down to project an image.
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.
Do not point the projector up to project an image.
Openings in the cabinet are provided for Install the projector properly. Improper ventilation and to ensure reliable operation of Installation may reduce the lamp life and the product and to protect it from overheating, cause a fire hazard.
and these openings must not be blocked or
covered.Do not tilt the projector side-
ways.
CAUTION
Installing the Projector in Proper Position
Air Circulation