Sanyo DSU21E Adjusting the Projector Height, Adjusting the Projector Zoom and Focus, EN-19

Adjusting the Projector

Adjusting the Projector Height

Tilt-adjustment foot

Elevator foot

Elevator button

The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image:

1.To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.

2.To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.

„To avoid damaging the projector, make sure that the elevator foot and tilt-adjustment foot are fully retracted before placing the projector in its carrying case.

„The tilt-adjustment foot in the bottom of the projector will fall from the projector when you

loosen the foot to the maximum. In this case, turn it back into position. Do not let the tilt- adjustment foot fall from the projector when making the adjustment.

Adjusting the Projector Zoom and Focus

Zoom ring

Focus ring

1.Focus the image by rotating the focus ring. A still image is recommended for focusing.

2.Adjust the image by sliding the zoom ring.

EN-19