Sanyo DSU21E, DSU21N, DSU21B owner manual Safety Precaution, EN-1

Page 3

To the Owner

Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.

Safety Precaution

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

-This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise, eye damage could result. Be especially careful that children do not stare directly into the beam.

-Install the projector in a proper position. If not, it may result in a fire hazard.

-Provide appropriate space on the top, sides and rear of the projector cabinet for allowing air circulation and cooling the projector. Minimum clearance must be maintained. If the projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.

SIDE and TOP

REAR

15 cm

90 cm

30 cm

30 cm

-If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.

CAUTION

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.

EN-1

Image 3
Contents PDG-DSU21N/DSU21E/DSU21B Page EN-1 Safety PrecautionSanyo Fisher Sales Europe GmbH EN-2Notas acerca de pilas de Litio Solo CARIFORNIA, EE.UU Voor de klanten in NederlandEN-3 Safety InstructionsMoving the Projector Installing the Projector in Proper PositionAir Circulation EN-4EN-5 ComplianceEN-6 Contents Projector Features IntroductionEN-8 Package Contents Projector Overview Front ViewEN-10 Rear View Bottom ViewEN-11 EN-12 Using the ProductControl Panel Button FunctionConnection Ports EN-13RS-232C EN-14 Remote ControlEN-15 Replacing the BatteryEN-16 Remote Control OperationInstallation Connecting the ProjectorEN-17 EN-18 Powering On/Off the ProjectorPowering On the Projector Powering Off the ProjectorEN-19 Adjusting the ProjectorAdjusting the Projector Height Adjusting the Projector Zoom and FocusEN-20 Adjusting Projection Image SizeEN-21 Menu OperationHow to operate Picture Computer / Video ModeEN-22 White Intensity Aspect Ratio Video ModeEN-23 ImageSetting Computer / Video Mode Computer Image Computer ModeVideo Image Video Mode Sound Computer / Video ModeLanguage Computer / Video Mode Factory Default Computer / Video ModeEN-25 EN-26 MaintenanceCleaning the Lens Cleaning the Projector HousingEN-27 Replacing the LampEN-28 Order Replacement LampSpecifications Remote ControlEN-29 Optional Parts LED Indicator MessagesAppendix EN-30EN-31 Compatibility ModesComputer VideoRemote control problems TroubleshootingStart-up problems Image problemsCommand Format Connection and OperationEN-33 On the remote Functions Control Configuration of RS-232C TerminalAvailable button Icon EN-34Page Part No AA6P1P5587--KA7AA