Hitachi CP-S235 user manual Option Menu, Screen Type, Lamp Time

Page 31

Multifunctional Settings (continued)

OPTION Menu

With the OPTION menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN

VOLUME

16

PICTURE-1

SCREEN TYPE

4:3

PICTURE-2

LAMP TIME

1234h

INPUT

FILTER TIME

21h

AUTO

RESET

 

SCREEN

 

 

OPTION

 

 

: SELECT

Item

 

 

 

 

Description

 

 

 

 

 

 

 

 

 

VOLUME

Adjust Volume: High

⇔

 

Low

 

 

 

 

 

 

 

 

 

 

Select the Screen Type:

 

 

 

 

 

 

4:3

⇔

16:9

 

⇔

16:9

⇔

16-9

SCREEN TYPE

• Please select the screen type used and the picture position in case of 16:9.

 

This selection is used as basic information for a suitable display. This function

 

should be performed before other picture adjustment.

 

 

 

 

 

 

To begin the operation of this item, please press the

button of the

 

projector or the RESET button of the remote control for 3 seconds.

 

Reset the Lamp Timer:

 

 

 

 

 

 

Selecting the RESET performs this function.

 

 

 

RESET

⇒

CANCEL

 

 

 

 

 

•The numerical value of four digits shown on this menu is the projector use time since the last RESET operation of this item. The value is reset to 0 at the

LAMP TIME

same time the RESET is selected.

•The value of this function is used to display the message of “CHANGE THE LAMP”. So this function must be performed only immediately after replacing the lamp.

Do not perform this function unless you have replaced the lamp. Perform this function every time the lamp is replaced. Incorrect performing of this function causes incorrect operation of the message function.

•Please see to the section “Lamp” about replacing the lamp.

To begin the operation of this item, please press the button of the projector or the RESET button of the remote control for 3 seconds.

Reset the Filter Timer:

Selecting the RESET performs this function.

RESET

⇒ CANCEL

•The numerical value of four digits shown on this menu is the projector use time since the last RESET operation of this item. The value is reset to 0 at the same time the RESET is selected.

FILTER TIME • The value of this function is used to display the message of “CLEAN THE AIR FILTER”. So this function must be performed only immediately after cleaning or replacing the air filter.

Do not perform this function unless you have cleaned or replaced the air filter. Perform this function every time the air filter is cleaned or replaced. Incorrect performing of this function causes incorrect operation of the message function.

•Please see to the section “Air Filter” about cleaning and replacing the air filter.

 

Reset the OPTION Menu Items:

 

Selecting the EXECUTE performs this function.

RESET

EXECUTE

⇒ CANCEL

•The SCREEN TYPE item is returned to the initial setting. Note that the items VOLUME, LAMP TIME and FILTER TIME are not reset.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Projector CP-S235Contents Preparation Projector FeaturesProjector Part NamesFastening The Lens Cap Projector Input button Power indicator Temp indicatorRemote Control Arrangement Setting UpTwisting the elevator feet by hand Adjusting The Projectors ElevatorAdjust the height of the projector by As necessary, you can also finelyConnecting Your Devices AUDIO-L AUDIO-R G B R Connecting to a computerFirmly plug the power cord’s plug Into the outlet Connecting Power SupplyPutting Batteries Remote ControlRemove Battery cover Close Battery coverOperating The Remote Control Set the power switch to on Power ON/OFFTurning On The Power When the lens cap is attached, removeSelecting An Input Signal Attached the lens cap Turning Off The PowerSwitch the power switch to O OFF Power switch OFF positionOperating Adjusting The VolumeTemporarily Muting The Sound Use Buttons to adjust Position Adjusting The PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeaturePress the Magnify on button Using The Magnify FeatureUse Buttons to adjust the zoom Level Freezing The ScreenSelecting The Aspect Ratio Signal SearchingTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu LOAD4 Load/Save a SettingReset the PICTURE-1 Menu Items Picture 1 MenuSize PhasePicture 2 Menu PositionFrame Lock Input MenuColor Space VideoS2-ASPECT Input MenuVideo NR InformationAuto Menu AdjustSearch Start UP Screen MenuMessage Screen Type Option MenuLamp Time Operating The PC Screen Available Functions Remote Control OperationUSB Mouse/Keyboard Control Lamp Replacing The Lamp Caring For The Air Filter Air FilterFilter, while pulling down it Replacing The Air FilterNew air filter. Tell the dealer your air Hold the release buttons of the airCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRelated Messages Power Lamp Temp Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceSpecification Specifications

CP-S235 specifications

The Hitachi CP-S235 is a versatile and robust portable projector designed for a variety of environments, including classrooms, small to medium-sized meeting rooms, and event spaces. Its compact design and lightweight build make it highly portable, allowing users to easily transport it for presentations and lectures. With an emphasis on ease of use and performance, the CP-S235 incorporates several features that enhance its functionality and picture quality.

One of the key features of the Hitachi CP-S235 is its bright display capability. With a brightness of 3000 ANSI lumens, it ensures that presentations remain clear and visible, even in well-lit environments. The projector offers a native XGA resolution of 1024 x 768 pixels, providing sharp and detailed images that are ideal for displaying graphs, charts, and images with fine details. Its high contrast ratio enhances the depth of colors, making visuals more vibrant and engaging.

The Hitachi CP-S235 integrates advanced technologies that contribute to its exceptional performance. The use of 3LCD technology helps in delivering accurate color reproduction, providing a uniform brightness level across various colors. This makes it suitable for presenting images and videos that require precise color fidelity, such as educational content and marketing materials.

Connectivity options are plentiful, with HDMI, VGA, and composite inputs allowing users to connect various devices such as laptops, DVD players, and video game consoles seamlessly. The CP-S235 also supports USB connectivity, enabling users to present directly from USB flash drives, which simplifies the setup process and reduces the need for additional devices.

With a lamp life of up to 5000 hours in eco mode, the Hitachi CP-S235 is designed for longevity, requiring less frequent lamp replacements and lowering the total cost of ownership. The eco-friendly features include a low power consumption mode that reduces energy usage when the projector is not in active use.

User-friendly features such as automatic vertical keystone correction and quick setup mean that users can easily achieve optimal image positioning without technical adjustments.

In summary, the Hitachi CP-S235 is a feature-rich projector that stands out for its exceptional brightness, advanced technologies, and user-centric design, making it an ideal choice for professionals seeking reliability and high-quality presentations in diverse settings.
Top Page Image Contents