Lamp

WARNING

HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE

The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

About disposal of a lamp • This product contains a mercury lamp; do not put in trash. Dispose of in accord with environmental laws.

For lamp recycling, go to www.lamprecycle.org. (in USA)

For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).

For more information, call your dealer.

•If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.

•If the lamp should break (it will make a loud bang when it does), ventilate

Disconnect the the room well, and make sure not to breathe the gas that comes out of plug from the the projector vents, or get it in your eyes or mouth.

power outlet

•Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp.

•Do not open the lamp cover while the projector is suspended from above. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.

•Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.

•Use only the lamp of the specified type DT00621.

•If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

•Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

•If the indicators or a message prompts you to replace the lamp (see the section “Related Messages” and “Regarding the indicator Lamps”), replace the lamp as soon as possible. Using the lamp for long periods of time, or past the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage.

CP-S235 specifications

The Hitachi CP-S235 is a versatile and robust portable projector designed for a variety of environments, including classrooms, small to medium-sized meeting rooms, and event spaces. Its compact design and lightweight build make it highly portable, allowing users to easily transport it for presentations and lectures. With an emphasis on ease of use and performance, the CP-S235 incorporates several features that enhance its functionality and picture quality.

One of the key features of the Hitachi CP-S235 is its bright display capability. With a brightness of 3000 ANSI lumens, it ensures that presentations remain clear and visible, even in well-lit environments. The projector offers a native XGA resolution of 1024 x 768 pixels, providing sharp and detailed images that are ideal for displaying graphs, charts, and images with fine details. Its high contrast ratio enhances the depth of colors, making visuals more vibrant and engaging.

The Hitachi CP-S235 integrates advanced technologies that contribute to its exceptional performance. The use of 3LCD technology helps in delivering accurate color reproduction, providing a uniform brightness level across various colors. This makes it suitable for presenting images and videos that require precise color fidelity, such as educational content and marketing materials.

Connectivity options are plentiful, with HDMI, VGA, and composite inputs allowing users to connect various devices such as laptops, DVD players, and video game consoles seamlessly. The CP-S235 also supports USB connectivity, enabling users to present directly from USB flash drives, which simplifies the setup process and reduces the need for additional devices.

With a lamp life of up to 5000 hours in eco mode, the Hitachi CP-S235 is designed for longevity, requiring less frequent lamp replacements and lowering the total cost of ownership. The eco-friendly features include a low power consumption mode that reduces energy usage when the projector is not in active use.

User-friendly features such as automatic vertical keystone correction and quick setup mean that users can easily achieve optimal image positioning without technical adjustments.

In summary, the Hitachi CP-S235 is a feature-rich projector that stands out for its exceptional brightness, advanced technologies, and user-centric design, making it an ideal choice for professionals seeking reliability and high-quality presentations in diverse settings.