Hitachi CP-S235 user manual Adjusting The Projectors Elevator, As necessary, you can also finely

Setting Up (continued)

Adjusting The Projector's Elevator

CAUTION • If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.

You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.

1 Press and hold in the elevator buttons.

2	Raise or lower the projector to the
	desired height and then release the

elevator buttons.

Elevator buttons

When you release the elevator buttons, the elevator feet will lock into position.

3	As necessary, you can also finely
	adjust the height of the projector by

twisting the elevator feet by hand.

Elevator feet

8