Hitachi CP-S235 Other Care, Caring For The Inside Of The Projector, Caring For The Lens

Page 37

Other Care

WARNINGPlease carefully read the “User’s Manual - Safety Guide”.

Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in.

ATTENTION • Do not use cleaners or chemicals other than those listed below, including benzene and paint thinner.

Do not use aerosols or sprays.

Do not polish or wipe with hard objects.

Caring For The Inside Of The Projector

In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.

Caring For The Lens

1

Turn off the projector, and unplug the

 

 

power cord.

 

2

Lightly wipe the lens with a

 

 

commercially available lens-cleaning

 

 

wipe. Do not touch the lens directly

 

 

with your hand.

Lens

Caring For The Cabinet And Remote Control

 

1

Turn off the projector, and unplug the power cord.

 

2

Wipe lightly with gauze or a soft cloth.

 

 

If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and

wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

37

Image 37
Contents Projector CP-S235Contents Preparation Projector FeaturesProjector Part NamesFastening The Lens Cap Projector Input button Power indicator Temp indicatorRemote Control Arrangement Setting UpAdjust the height of the projector by Adjusting The Projectors ElevatorAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices AUDIO-L AUDIO-R G B R Connecting to a computerFirmly plug the power cord’s plug Into the outlet Connecting Power SupplyRemove Battery cover Remote ControlClose Battery cover Putting BatteriesOperating The Remote Control Turning On The Power Power ON/OFFWhen the lens cap is attached, remove Set the power switch to onSelecting An Input Signal Switch the power switch to O OFF Turning Off The PowerPower switch OFF position Attached the lens capOperating Adjusting The VolumeTemporarily Muting The Sound Use Buttons to adjust Position Adjusting The PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeatureUse Buttons to adjust the zoom Level Using The Magnify FeatureFreezing The Screen Press the Magnify on buttonSelecting The Aspect Ratio Signal SearchingTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu Reset the PICTURE-1 Menu Items Load/Save a SettingPicture 1 Menu LOAD4Picture 2 Menu PhasePosition SizeColor Space Input MenuVideo Frame LockVideo NR Input MenuInformation S2-ASPECTAuto Menu AdjustSearch Start UP Screen MenuMessage Screen Type Option MenuLamp Time Operating The PC Screen Available Functions Remote Control OperationUSB Mouse/Keyboard Control Lamp Replacing The Lamp Caring For The Air Filter Air FilterNew air filter. Tell the dealer your air Replacing The Air FilterHold the release buttons of the air Filter, while pulling down itOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Power Lamp Temp Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceSpecification Specifications