Remote control, Installing the batteries | Hitachi CP-X3020 instruction

Remote control

Installing the batteries

Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.

Holding the hook part of the battery	1	2	3
1. cover, remove it.

2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals

as indicated in the remote control.

3. Replace the battery cover in the direction of the arrow and snap it back into place.

WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in re, injury and/or pollution of the surrounding environment.

•Be sure to use only the batteries specied. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

•Make sure the plus and minus terminals are correctly aligned when loading a battery.

•Keep a battery away from children and pets.

•Do not recharge, short circuit, solder or disassemble a battery.

•Do not place a battery in a re or water. Keep batteries in a dark, cool and dry place.

•If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately.

•Obey the local laws on disposing the battery.

About the remote control signal

The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active:

60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.

Approx.

3 m

30º 30º

NOTE • The remote control signal reected in the screen or the like may be available. If it is difcult to send the signal to the sensor directly, attempt to make the signal reect.

•The remote control uses infrared light to send signals to the projector (Class 1 LED), so be sure to use the remote control in an area free from obstacles that could block the remote control’s signal to the projector.

•The remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter uorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights.

CP-X3020 specifications

The Hitachi CP-X3020 is a versatile and reliable multimedia projector, designed to meet the needs of both professional and educational environments. Known for its impressive performance and ease of use, this projector has garnered attention for its array of features, technologies, and characteristics that enhance presentation experiences.

At the heart of the CP-X3020 is its brightness capability of up to 3,000 ANSI lumens. This ensures that presentations remain vivid and clear, even in well-lit rooms. The projector has a native resolution of XGA (1024x768), which is suitable for displaying high-quality images and detailed graphics. With a 2000:1 contrast ratio, it provides sharp images that highlight the differences between light and dark areas effectively.

One of the standout features of the Hitachi CP-X3020 is its advanced technology that allows for a variety of connectivity options. It includes HDMI, VGA, and USB ports, ensuring compatibility with a wide range of devices, from laptops to tablets. This flexibility makes it easy for users to connect their devices quickly, facilitating seamless presentations.

The CP-X3020 also incorporates Hitachi's Intelligent Eco mode, which optimizes lamp power and enhances energy efficiency. This not only lowers operational costs but also extends the lifespan of the projector's lamp, which is rated for up to 5,000 hours in standard mode and up to 6,000 hours in Eco mode.

Another notable aspect of the projector is its portability. Weighing around 2.9 kg, the CP-X3020 is easy to transport, making it an excellent choice for professionals on the go. Its compact design allows it to fit comfortably in most bags, without compromising its robust performance.

In terms of ease of use, the Hitachi CP-X3020 features a user-friendly interface and remote control, simplifying navigation through settings and options during a presentation. It also supports a wide range of projection modes, including front, rear, ceiling mount, and more, which increases its versatility in various setup scenarios.

Additional features include a built-in speaker for audio playback, as well as a digital zoom and focus function that allows for easy adjustments on the fly. The projector’s ability to handle various file formats ensures that users can project content without compatibility concerns.

In summary, the Hitachi CP-X3020 is a well-rounded multimedia projector that combines high brightness, versatile connectivity, energy efficiency, and user friendliness, making it an ideal choice for education and professional use. With its robust performance and advanced features, it delivers impressive results in any setting, helping users convey their messages effectively and engagingly.

Remote control

Installing the batteries

Holding the hook part of the battery

1. cover, remove it.

About the remote control signal

CP-X3020 specifications