Hitachi CP-X3020 user manual Standby Mode, Monitor OUT

Page 46

SETUP menu

Item

Description

 

Using the ▲/▼ buttons turns off/on the eco mode.

ECO MODE

NORMAL Ù ECO

• When the ECO is selected, acoustic noise and screen brightness

 

 

are reduced.

 

Using the ▲/▼ buttons switches the mode for mirror status.

MIRROR

NORMAL Ù H:INVERT Ù V:INVERT Ù H&V:INVERT

If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (53) will be displayed when projector is restarted after the AC power is turned off.

Using ▲/▼ buttons switches the standby mode setting between

NORMAL and SAVING.

NORMAL Ù SAVING

•When SAVING is selected and the projector is in the standby state, the power consumption is lowered with some functional

STANDBY MODE

restrictions as below.

 

 

 

 

- The RS-232C communication control is disabled except turning

 

the projector on and changing the STANDBY MODE setting.

 

 

- The STANDBY of the MONITOR OUT (

below) is invalid, and no

 

signal is output from the MONITOR OUT port.

38) is

 

- The AUDIO OUT STANDBY of the AUDIO SOURCE (

 

invalid, and no signal is output from the AUDIO OUT ports (

5).

 

While the image signal from the input port chosen in step (1) is

 

projected, the image signal from the input port selected in step (2)

 

is output to MONITOR OUT port.

 

(1) Choose a picture input port using

 

▲/▼ buttons.

 

Choose STANDBY to select the

 

picture output in the standby mode.

 

(2) Select one of the COMPUTER IN

 

ports using ◄/► buttons.

MONITOR OUT

Select OFF to disable the MONITOR

OUT port for the input port or

 

 

standby mode chosen in the step (1).

•You cannot select COMPUTER IN1 in step (1) and COMPUTER IN2 in step (2) and vice versa.

•If you have changed the setting of STANDBY, it applies only to the current standby mode, NORMAL or SAVING, selected under STANDBY MODE, without changing the setting of the other mode. The factory settings are as follows:

- COMPUTER IN1 for the NORMAL mode of STANDBY MODE - OFF for the SAVING mode of STANDBY MODE

37

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Read this Safety Guide first ProjectorDo not insert liquids or foreign object Never use the projector if a problem should occurUse special caution for children and pets Never disassemble and modifyBe cautious of the power cord connection Be cautious of High temperatures of the projectorNever look through the lens or openings when the lamp is on Be sure to connect with ground wireBe careful in handling the battery of the remote control Be careful in handling the light source lampDo not put anything on top of the projector Avoid a high temperature environmentBe careful in moving the projector Avoid a smoky, humid or dusty placeTake care of the cabinet and the remote control Remove the power cord for complete separationDo not give the remote control any physical impact Take care of the lensConnecting with notebook computer About displaying characteristicTurn the power on/off in right order About consumablesLamp FCC Statement Warning For the Customers in CanadaContents Checking the contents of package HOT Part namesProjector HOTSTANDBY/ON button Control panelRear panel Video port Audio IN1 port Audio IN2 port Audio OUT portRemote control Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Monitor Connecting your devicesVCR/DVD/Blu-ray Disc player Speakers Connecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotAbout the remote control signal Remote controlInstalling the batteries Holding the hook part of the battery Cover, remove itUsing as a simple PC mouse & keyboard Turning off the power Power on/offTurning on the power STANDBY/ON buttonPrecaution for lens cover attachment and removal Operating Adjusting the volumeSelecting an input signal Temporarily muting the soundVideo button Press the MY Source / DOC. Camera button onComputer button MY Source€ For no signal Searching an input signal€ For a computer signal Selecting an aspect ratioAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the positionCorrecting the keystone distortions Keystone buttonUsing the magnify feature Magnify ON/OFF buttonFreeze button Temporarily freezing the screenTemporarily blanking the screen Blank buttonAdvanced Menu Using the menu functionESC button Reset button Input button Enter buttonIndication in OSD On Screen Display Position buttonIndication Meaning Aspect Picture ModeDescription Auto KeystoneMirror ECO ModeReset Filter TimeContrast Picture menuBrightness GammaTint Color TempColor SharpnessMY Memory LOAD-1, LOAD-2, LOAD-3, LOAD-4Image menu For a computer signalFor no signal Over ScanSize PhaseAuto Adjust ExecuteVideo NR Input menuProgressive Color SpaceComputer Video FormatFrame Lock Resolution Setup menu ModeStandby Mode Monitor OUTAudio menu VolumeSpeaker Blank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is nished MyScreen Lock MessageSource Name Template Mode Description Closed CaptionDisplay ChannelAuto Search Option menuAuto OFF Auto PowerLamp Time MY Button Ghost ServiceFAN Speed Filter MessageKEY Lock Factory ResetInformation Enter the Security menu PasswordSecurity menu SecurityTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen Turning off the PIN Lock PIN LockTurning on the PIN Lock If you have forgotten your PIN CodeDetector TransitionTurning on the Transition Detector Turning off the Transition DetectorMY Text Password Turning on the MY Text PasswordTurning off the MY Text Password MY Text WritingType number DT01141 MaintenanceReplacing the lamp Replacing the lampHigh Voltage High Temperature Lamp warningCleaning and replacing the air filter Type number UX36761 Filter setCleaning and replacing the air lter Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensAn improper signal is input TroubleshootingMessage Description There is no input signal Internal temperature is risingRegarding the indicator lamps There is a possibility that the interior portion Resetting all settingsIt is time to clean the air lter Has become heatedSignal source does not correctly work Electrical power cord is not pluggedSignal cables are not correctly connected Input changeover settings are mismatchedColor Space setting is not suitable Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Mute function is workingLamp is approaching the end of its product Lifetime ECO Mode function is workingNot properly adjusted Lens is dirty or mistySpecications Specication221 306 Example of PC signal CP-X2520/CP-X3020Initial set signals Connection to the ports Computer IN1, B Computer IN2, C Monitor OUTVideo Audio IN1, G Audio IN2 USB To input component video signal to Computer in ports RS-232C Communication ConnectionControl port Header code, Packet, Data size Communication settingsType, Setting code CRC agRS-232C Communication command table Gamma Be EF 7C FF Color Size Frame Lock Be EF FD CD Computer IN2 Not all of the languages in the table are supported On next Be EF FB D8 Be EF Lamp Time MY Memory Be EF FA 3D Picture Mode Contents CP-X2520/CP-X3020Important safety instruction Entries and graphical symbols explanationFirst of all Regulatory notices About Electro-Magnetic Interference CanadaContents of package Loading batteries into the remote control PreparationsArrangement Keep a space of 30 cm or more between the sidesConnecting your devices VCR/DVD/Blu-ray Disc playerTurning on the power Connecting power supplySTANDBY/ON button Power indicator Adjusting the projectors elevator Displaying the picture Input buttonTurning off the power Replacing the lamp High Voltage High Temperature OHDQLQJDQGUHSODFLQJWKHDLUÀOWHU CD-ROM drive Using the CD manualMacintosh Display6SHFLÀFDWLRQV Troubleshooting Warranty and after-service Hitachi Europe S.A Hitachi Europe S.A.S., Digital Media GroupHitachi Europe GmbH Hitachi Europe S.r.l

CP-X3020 specifications

The Hitachi CP-X3020 is a versatile and reliable multimedia projector, designed to meet the needs of both professional and educational environments. Known for its impressive performance and ease of use, this projector has garnered attention for its array of features, technologies, and characteristics that enhance presentation experiences.

At the heart of the CP-X3020 is its brightness capability of up to 3,000 ANSI lumens. This ensures that presentations remain vivid and clear, even in well-lit rooms. The projector has a native resolution of XGA (1024x768), which is suitable for displaying high-quality images and detailed graphics. With a 2000:1 contrast ratio, it provides sharp images that highlight the differences between light and dark areas effectively.

One of the standout features of the Hitachi CP-X3020 is its advanced technology that allows for a variety of connectivity options. It includes HDMI, VGA, and USB ports, ensuring compatibility with a wide range of devices, from laptops to tablets. This flexibility makes it easy for users to connect their devices quickly, facilitating seamless presentations.

The CP-X3020 also incorporates Hitachi's Intelligent Eco mode, which optimizes lamp power and enhances energy efficiency. This not only lowers operational costs but also extends the lifespan of the projector's lamp, which is rated for up to 5,000 hours in standard mode and up to 6,000 hours in Eco mode.

Another notable aspect of the projector is its portability. Weighing around 2.9 kg, the CP-X3020 is easy to transport, making it an excellent choice for professionals on the go. Its compact design allows it to fit comfortably in most bags, without compromising its robust performance.

In terms of ease of use, the Hitachi CP-X3020 features a user-friendly interface and remote control, simplifying navigation through settings and options during a presentation. It also supports a wide range of projection modes, including front, rear, ceiling mount, and more, which increases its versatility in various setup scenarios.

Additional features include a built-in speaker for audio playback, as well as a digital zoom and focus function that allows for easy adjustments on the fly. The projector’s ability to handle various file formats ensures that users can project content without compatibility concerns.

In summary, the Hitachi CP-X3020 is a well-rounded multimedia projector that combines high brightness, versatile connectivity, energy efficiency, and user friendliness, making it an ideal choice for education and professional use. With its robust performance and advanced features, it delivers impressive results in any setting, helping users convey their messages effectively and engagingly.
Top Page Image Contents