Hitachi CP-X3020 user manual Auto Power, Off, Lamp Time

Page 55

OPTION menu

Item

Description

 

Using the /buttons adjusts the time to count down to

 

automatically turn the projector off.

 

Long (max. 99 minutes) Ù Short (min. 0 minute = DISABLE)

AUTO POWER

When the time is set to 0, the projector is not turned off automatically.

OFF

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will be turned off.

 

If one of the projector's buttons or the remote control buttons

 

is pressed or one of the commands (except get commands) is

 

transmitted to the CONTROL port during the corresponding time,

 

projector will not be turned off.

 

Please refer to the section “Turning off the power” ( 14).

 

The lamp time is the usage time of the lamp, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the button

 

of the projector displays a dialog.

LAMP TIME

To reset the lamp time, select the OK using the button.

CANCEL Ö OK

 

Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

For the lamp replacement, see the section "Replacing the lamp"

(56, 57).

 

The lter time is the usage time of the air lter, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the button

 

of the projector displays a dialog.

FILTER TIME

To reset the lter time, select the OK using the button.

CANCEL Ö OK

 

 

• Please reset the lter time only when you have cleaned or replaced

 

the air lter, for a suitable indication about the air lter.

 

• For the air lter cleaning, see the section “Cleaning and replacing

 

the air lter” ( 58, 59).

(continued on next page)

46

Image 55
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Projector Read this Safety Guide firstNever disassemble and modify Never use the projector if a problem should occurUse special caution for children and pets Do not insert liquids or foreign objectBe sure to connect with ground wire Be cautious of High temperatures of the projectorNever look through the lens or openings when the lamp is on Be cautious of the power cord connectionBe careful in handling the light source lamp Be careful in handling the battery of the remote controlAvoid a smoky, humid or dusty place Avoid a high temperature environmentBe careful in moving the projector Do not put anything on top of the projectorTake care of the lens Remove the power cord for complete separationDo not give the remote control any physical impact Take care of the cabinet and the remote controlAbout consumables About displaying characteristicTurn the power on/off in right order Connecting with notebook computerLamp For the Customers in Canada FCC Statement WarningContents Checking the contents of package HOT Part namesProjector HOTVideo port Audio IN1 port Audio IN2 port Audio OUT port Control panelRear panel STANDBY/ON buttonRemote control Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Monitor Connecting your devicesVCR/DVD/Blu-ray Disc player Speakers About Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyHolding the hook part of the battery Cover, remove it Remote controlInstalling the batteries About the remote control signalUsing as a simple PC mouse & keyboard STANDBY/ON button Power on/offTurning on the power Turning off the powerPrecaution for lens cover attachment and removal Temporarily muting the sound Adjusting the volumeSelecting an input signal OperatingMY Source Press the MY Source / DOC. Camera button onComputer button Video buttonSelecting an aspect ratio Searching an input signal€ For a computer signal € For no signalAdjusting the zoom and focus Adjusting the projectors elevatorAdjusting the position Using the automatic adjustment featureKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonInput button Enter button Using the menu functionESC button Reset button Advanced MenuIndication in OSD On Screen Display Position buttonIndication Meaning Auto Keystone Picture ModeDescription AspectFilter Time ECO ModeReset MirrorGamma Picture menuBrightness ContrastSharpness Color TempColor TintLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemoryOver Scan For a computer signalFor no signal Image menuExecute PhaseAuto Adjust SizeColor Space Input menuProgressive Video NRComputer Video FormatFrame Lock Resolution Mode Setup menuMonitor OUT Standby ModeAudio menu VolumeSpeaker Blank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is nished Message MyScreen LockSource Name Template Channel Description Closed CaptionDisplay ModeAuto Search Option menuAuto OFF Auto PowerLamp Time MY Button Filter Message ServiceFAN Speed GhostKEY Lock Factory ResetInformation Security PasswordSecurity menu Enter the Security menuTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen If you have forgotten your PIN Code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning off the Transition Detector TransitionTurning on the Transition Detector DetectorMY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Writing MY TextReplacing the lamp MaintenanceReplacing the lamp Type number DT01141Lamp warning High Voltage High TemperatureType number UX36761 Filter set Cleaning and replacing the air filterCleaning and replacing the air lter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorInternal temperature is rising TroubleshootingMessage Description There is no input signal An improper signal is inputRegarding the indicator lamps Has become heated Resetting all settingsIt is time to clean the air lter There is a possibility that the interior portionInput changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workMute function is working Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableLens is dirty or misty ECO Mode function is workingNot properly adjusted Lamp is approaching the end of its product LifetimeSpecication Specications221 306 CP-X2520/CP-X3020 Example of PC signalInitial set signals Computer IN1, B Computer IN2, C Monitor OUT Connection to the portsVideo Audio IN1, G Audio IN2 USB To input component video signal to Computer in ports RS-232C Communication ConnectionControl port CRC ag Communication settingsType, Setting code Header code, Packet, Data sizeRS-232C Communication command table Gamma Be EF 7C FF Color Size Frame Lock Be EF FD CD Computer IN2 Not all of the languages in the table are supported On next Be EF FB D8 Be EF Lamp Time MY Memory Be EF FA 3D Picture Mode CP-X2520/CP-X3020 ContentsImportant safety instruction Entries and graphical symbols explanationFirst of all About Electro-Magnetic Interference Canada Regulatory noticesContents of package Preparations Loading batteries into the remote controlKeep a space of 30 cm or more between the sides ArrangementVCR/DVD/Blu-ray Disc player Connecting your devicesTurning on the power Connecting power supplySTANDBY/ON button Power indicator Adjusting the projectors elevator Input button Displaying the pictureTurning off the power Replacing the lamp High Voltage High Temperature OHDQLQJDQGUHSODFLQJWKHDLUÀOWHU Display Using the CD manualMacintosh CD-ROM drive6SHFLÀFDWLRQV Troubleshooting Warranty and after-service Hitachi Europe S.r.l Hitachi Europe S.A.S., Digital Media GroupHitachi Europe GmbH Hitachi Europe S.A

CP-X3020 specifications

The Hitachi CP-X3020 is a versatile and reliable multimedia projector, designed to meet the needs of both professional and educational environments. Known for its impressive performance and ease of use, this projector has garnered attention for its array of features, technologies, and characteristics that enhance presentation experiences.

At the heart of the CP-X3020 is its brightness capability of up to 3,000 ANSI lumens. This ensures that presentations remain vivid and clear, even in well-lit rooms. The projector has a native resolution of XGA (1024x768), which is suitable for displaying high-quality images and detailed graphics. With a 2000:1 contrast ratio, it provides sharp images that highlight the differences between light and dark areas effectively.

One of the standout features of the Hitachi CP-X3020 is its advanced technology that allows for a variety of connectivity options. It includes HDMI, VGA, and USB ports, ensuring compatibility with a wide range of devices, from laptops to tablets. This flexibility makes it easy for users to connect their devices quickly, facilitating seamless presentations.

The CP-X3020 also incorporates Hitachi's Intelligent Eco mode, which optimizes lamp power and enhances energy efficiency. This not only lowers operational costs but also extends the lifespan of the projector's lamp, which is rated for up to 5,000 hours in standard mode and up to 6,000 hours in Eco mode.

Another notable aspect of the projector is its portability. Weighing around 2.9 kg, the CP-X3020 is easy to transport, making it an excellent choice for professionals on the go. Its compact design allows it to fit comfortably in most bags, without compromising its robust performance.

In terms of ease of use, the Hitachi CP-X3020 features a user-friendly interface and remote control, simplifying navigation through settings and options during a presentation. It also supports a wide range of projection modes, including front, rear, ceiling mount, and more, which increases its versatility in various setup scenarios.

Additional features include a built-in speaker for audio playback, as well as a digital zoom and focus function that allows for easy adjustments on the fly. The projector’s ability to handle various file formats ensures that users can project content without compatibility concerns.

In summary, the Hitachi CP-X3020 is a well-rounded multimedia projector that combines high brightness, versatile connectivity, energy efficiency, and user friendliness, making it an ideal choice for education and professional use. With its robust performance and advanced features, it delivers impressive results in any setting, helping users convey their messages effectively and engagingly.