Hitachi CP-X3020 user manual Turning on the PIN Lock, Turning off the PIN Lock

Page 61

SECURITY menu

Item

Description

PIN LOCK

PIN LOCK is a function which prevents the projector from being used unless a registered Code is input.

1 Turning on the PIN LOCK

1-1 Use the /buttons on the SECURITY menu to select PIN LOCK and press the button or the ENTER button to display the PIN LOCK on/ off menu.

1-2 Use the /buttons on the PIN LOCK on/ off menu to select ON and the Enter PIN Code box will be displayed.

1-3 Input a 4 part PIN code using the ///, COMPUTER or INPUT button.

The PIN Code again box will appear. Reenter the same PIN code. This will complete the PIN code registration.

If there is no key input for about 55 seconds

while the Enter PIN Code box or the PIN Code again box is displayed, the menu will close. If necessary, repeat the process from 1-1.

Afterwards, anytime the projector is restarted after AC power is turned off the Enter PIN Code box will be displayed. Enter the registered PIN code. The projector can be used after entering the registered PIN code. If an incorrect PIN code is input, the Enter PIN code box will be displayed again. If an incorrect PIN Code is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect PIN code is input. The projector will also turn off if there is no key input for about 5 minutes while the Enter PIN code box is displayed.

This function will activate only when the projector is started after AC power is turned off.

Please do not forget your PIN code.

2 Turning off the PIN LOCK

2-1 Follow the procedure in 1-1 to display the PIN LOCK on/off menu.

2-2 Use the /buttons to select OFF and the Enter PIN Code box will be displayed.

Enter the registered PIN code to turn the PIN LOCK function off. If an incorrect PIN Code is input 3 times, the menu will close.

3 If you have forgotten your PIN Code

3-1 While the Enter PIN Code box is displayed, press and hold the RESET button for three seconds or press and hold the INPUT button for 3 seconds while pressing the button on the projector.

The 10 digit Inquiring Code will be displayed.

If there is no key input for about 5 minutes while the Inquiring Code is displayed, the projector will turn off.

3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN Code will be sent after your user registration information is conrmed.

(continued on next page)

52

Image 61
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Projector Read this Safety Guide firstUse special caution for children and pets Never use the projector if a problem should occurDo not insert liquids or foreign object Never disassemble and modifyNever look through the lens or openings when the lamp is on Be cautious of High temperatures of the projectorBe cautious of the power cord connection Be sure to connect with ground wireBe careful in handling the light source lamp Be careful in handling the battery of the remote controlBe careful in moving the projector Avoid a high temperature environmentDo not put anything on top of the projector Avoid a smoky, humid or dusty placeDo not give the remote control any physical impact Remove the power cord for complete separationTake care of the cabinet and the remote control Take care of the lensTurn the power on/off in right order About displaying characteristicConnecting with notebook computer About consumablesLamp For the Customers in Canada FCC Statement WarningContents Checking the contents of package Projector Part namesHOT HOTRear panel Control panelSTANDBY/ON button Video port Audio IN1 port Audio IN2 port Audio OUT portRemote control Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Monitor Connecting your devicesVCR/DVD/Blu-ray Disc player Speakers About Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyInstalling the batteries Remote controlAbout the remote control signal Holding the hook part of the battery Cover, remove itUsing as a simple PC mouse & keyboard Turning on the power Power on/offTurning off the power STANDBY/ON buttonPrecaution for lens cover attachment and removal Selecting an input signal Adjusting the volumeOperating Temporarily muting the soundComputer button Press the MY Source / DOC. Camera button onVideo button MY Source€ For a computer signal Searching an input signal€ For no signal Selecting an aspect ratioAdjusting the zoom and focus Adjusting the projectors elevatorAdjusting the position Using the automatic adjustment featureKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureTemporarily blanking the screen Temporarily freezing the screenFreeze button Blank buttonESC button Reset button Using the menu functionAdvanced Menu Input button Enter buttonIndication in OSD On Screen Display Position buttonIndication Meaning Description Picture ModeAspect Auto KeystoneReset ECO ModeMirror Filter TimeBrightness Picture menuContrast GammaColor Color TempTint SharpnessLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemoryFor no signal For a computer signalImage menu Over ScanAuto Adjust PhaseSize ExecuteProgressive Input menuVideo NR Color SpaceComputer Video FormatFrame Lock Resolution Mode Setup menuMonitor OUT Standby ModeAudio menu VolumeSpeaker Blank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is nished Message MyScreen LockSource Name Template Display Description Closed CaptionMode ChannelAuto Search Option menuAuto OFF Auto PowerLamp Time MY Button FAN Speed ServiceGhost Filter MessageKEY Lock Factory ResetInformation Security menu PasswordEnter the Security menu SecurityTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen Turning on the PIN Lock PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeTurning on the Transition Detector TransitionDetector Turning off the Transition DetectorMY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Writing MY TextReplacing the lamp MaintenanceType number DT01141 Replacing the lampLamp warning High Voltage High TemperatureType number UX36761 Filter set Cleaning and replacing the air filterCleaning and replacing the air lter Other care Caring for the cabinet and remote controlInside of the projector Caring for the lensMessage Description There is no input signal TroubleshootingAn improper signal is input Internal temperature is risingRegarding the indicator lamps It is time to clean the air lter Resetting all settingsThere is a possibility that the interior portion Has become heatedSignal cables are not correctly connected Electrical power cord is not pluggedSignal source does not correctly work Input changeover settings are mismatchedColor settings are not correctly adjusted Volume is adjusted to an extremely low levelColor Space setting is not suitable Mute function is workingNot properly adjusted ECO Mode function is workingLamp is approaching the end of its product Lifetime Lens is dirty or mistySpecication Specications221 306 CP-X2520/CP-X3020 Example of PC signalInitial set signals Computer IN1, B Computer IN2, C Monitor OUT Connection to the portsVideo Audio IN1, G Audio IN2 USB To input component video signal to Computer in ports RS-232C Communication ConnectionControl port Type, Setting code Communication settingsHeader code, Packet, Data size CRC agRS-232C Communication command table Gamma Be EF 7C FF Color Size Frame Lock Be EF FD CD Computer IN2 Not all of the languages in the table are supported On next Be EF FB D8 Be EF Lamp Time MY Memory Be EF FA 3D Picture Mode CP-X2520/CP-X3020 ContentsImportant safety instruction Entries and graphical symbols explanationFirst of all About Electro-Magnetic Interference Canada Regulatory noticesContents of package Preparations Loading batteries into the remote controlKeep a space of 30 cm or more between the sides ArrangementVCR/DVD/Blu-ray Disc player Connecting your devicesTurning on the power Connecting power supplySTANDBY/ON button Power indicator Adjusting the projectors elevator Input button Displaying the pictureTurning off the power Replacing the lamp High Voltage High Temperature OHDQLQJDQGUHSODFLQJWKHDLUÀOWHU Macintosh Using the CD manualCD-ROM drive Display6SHFLÀFDWLRQV Troubleshooting Warranty and after-service Hitachi Europe GmbH Hitachi Europe S.A.S., Digital Media GroupHitachi Europe S.A Hitachi Europe S.r.l

CP-X3020 specifications

The Hitachi CP-X3020 is a versatile and reliable multimedia projector, designed to meet the needs of both professional and educational environments. Known for its impressive performance and ease of use, this projector has garnered attention for its array of features, technologies, and characteristics that enhance presentation experiences.

At the heart of the CP-X3020 is its brightness capability of up to 3,000 ANSI lumens. This ensures that presentations remain vivid and clear, even in well-lit rooms. The projector has a native resolution of XGA (1024x768), which is suitable for displaying high-quality images and detailed graphics. With a 2000:1 contrast ratio, it provides sharp images that highlight the differences between light and dark areas effectively.

One of the standout features of the Hitachi CP-X3020 is its advanced technology that allows for a variety of connectivity options. It includes HDMI, VGA, and USB ports, ensuring compatibility with a wide range of devices, from laptops to tablets. This flexibility makes it easy for users to connect their devices quickly, facilitating seamless presentations.

The CP-X3020 also incorporates Hitachi's Intelligent Eco mode, which optimizes lamp power and enhances energy efficiency. This not only lowers operational costs but also extends the lifespan of the projector's lamp, which is rated for up to 5,000 hours in standard mode and up to 6,000 hours in Eco mode.

Another notable aspect of the projector is its portability. Weighing around 2.9 kg, the CP-X3020 is easy to transport, making it an excellent choice for professionals on the go. Its compact design allows it to fit comfortably in most bags, without compromising its robust performance.

In terms of ease of use, the Hitachi CP-X3020 features a user-friendly interface and remote control, simplifying navigation through settings and options during a presentation. It also supports a wide range of projection modes, including front, rear, ceiling mount, and more, which increases its versatility in various setup scenarios.

Additional features include a built-in speaker for audio playback, as well as a digital zoom and focus function that allows for easy adjustments on the fly. The projector’s ability to handle various file formats ensures that users can project content without compatibility concerns.

In summary, the Hitachi CP-X3020 is a well-rounded multimedia projector that combines high brightness, versatile connectivity, energy efficiency, and user friendliness, making it an ideal choice for education and professional use. With its robust performance and advanced features, it delivers impressive results in any setting, helping users convey their messages effectively and engagingly.