Hitachi CP-X3011N Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3, MAP2 MAP1 CIRCLE2 CIRCLE1 DOT-LINE4

Page 48

SCREEN menu

Item

Description

 

 

 

 

 

(6) The current name will be displayed on

 

 

the first line. Use the ▲/▼/◄/► buttons

 

 

and the ENTER or INPUT button to

 

 

select and enter characters. To erase 1

 

 

character at one time, press the RESET

 

 

button or press the ◄ and INPUT button

 

 

at the same time. Also if you move the

 

 

cursor to DELETE or ALL CLEAR on

 

 

screen and press the ENTER or INPUT

 

 

button, 1 character or all characters will

 

 

be erased. The name can be a maximum

 

SOURCE NAME

of 16 characters.

 

(Continued)

(7) To change an already inserted character,

 

 

press the ▲ button to move the cursor to

 

 

the first line, and use the ◄/► buttons to

 

 

move the cursor on the character to be

 

 

changed.

 

 

After pressing the ENTER or INPUT button, the character is

 

selected. Then, follow the same procedure as described at the

 

item (6) above.

 

 

(8) To finish entering text, move the cursor to the OK on screen and

 

press the ►, ENTER or INPUT button. To revert to the previous

 

name without saving changes, move the cursor to the CANCEL

 

on screen and press the ◄, ENTER or INPUT button.

 

Using the ▲/▼ cursor buttons switches the mode for the template

 

screen.

 

 

Press the ► cursor (or the ENTER) button to display the selected

 

template, and press the ◄ cursor button to close the displayed

 

screen.

 

 

The last selected template is displayed when the MY BUTTON

TEMPLATE

allocated to the TEMPLATE function is pressed (￿48).

 

TEST PATTERN ￿ DOT-LINE1 ￿ DOT-LINE2 ￿ DOT-LINE3

 

￿

￿

 

MAP2 ￿ MAP1 ￿ CIRCLE2 ￿ CIRCLE1 ￿ DOT-LINE4

 

You can turn a map upside down and scroll it horizontally when

 

MAP1 or MAP2 is selected. To invert or scroll the map, display

 

the guidance by pressing the RESET button on the remote three

 

seconds or more when MAP1 or MAP2 appears.

 

(continued on next page)

48

Downloaded from www.Manualslib.com manuals search engine

Image 48
Contents About this manual Thank you for purchasing this projectorCP-X2011N/CP-X2511N /CP-X3011N/CP-X4011N Trademark acknowledgmentContents Features Checking the contents of packagePart names ProjectorHOT Control panel STANDBY/ON button Rear panel 9 ~ USB Type a portLAN port Audio OUT L,R portsRemote control Down button Volume + buttonComputer button Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Connecting with your devices About Plug-and-Play capabilityConnecting with your devices VCR/DVD/Blu-ray Disc Computer PlayerConnecting with your devices Speakers Monitor Microphone systemUSB storage Device Computer Access point Connecting to a power supply Using the security bar and slotRemote control Installing the batteriesAbout the remote control signal Hitachi MAXELL, Part No.LR6 or R6PChanging the frequency of remote control signal Using as a simple PC mouse & keyboardUSB port Power on/off Turning on the powerTurning off the power STANDBY/ON buttonAdjusting the volume Selecting an input signalOperating Temporarily muting the soundPress the MY Source / DOC. Camera button on Computer buttonVideo button MY SourceSearching an input signal For an Hdmi signalSelecting an aspect ratio Search buttonAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the positionCorrecting the keystone distortions Keystone buttonUsing the magnify feature Magnify ON/OFF buttonTemporarily freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Advanced MenuIndication in OSD On Screen Display Indication MeaningDescription Normal Cinema Dynamic BoardblackDaytime Whiteboard Boardgreen ECO Mode MirrorLanguage SecurityPicture menu GammaCustom Presentation Theater OFF Active IrisSAVE-1, SAVE-2, SAVE-3, SAVE-4 MY Memory LOAD-1,LOAD-2,LOAD-3,LOAD-4For a computer signal For an Hdmi signalImage menu AspectPosition USB Type B or Hdmi portFor a video signal and s-video signal For a component video signalFrom the LAN, USB Type A, USB Type B or Hdmi port SizeInput menu TV Film OFFHigh MID LOW Component Scart RGBVideo Format Hdmi FormatHdmi Range Auto Sync on G OFF Frame LockOn OFF Resolution Setup menu Auto KeystoneKeystone Normal ECO Normal Hinvert Vinvert H&VINVERTNormal Saving Monitor OUTAudio menu 480i@60 for COMPONENT, Computer IN1 or Computer IN2MIC Volume Hdmi AudioMIC Level High LOWScreen menu English Français Deutsch EspañolBlank Start UPCapturing error has occurred. Please try again MyScreenMyScreen registration is finished No Input is Detected Sync is OUT of RangeInvalid Scan Freq MessageUse the / buttons on the Screen menu to select Source Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3 MAP2 MAP1 CIRCLE2 CIRCLE1 DOT-LINE4Description Closed Caption DisplayMode ChannelOption menu USB Type B portAuto OFF Mouse USB DisplayUSB Type B Type B portCancel OK Lamp TimeMY Button X4011N Computer IN1 Computer IN2 LAN USB Type aService Auto AdjustFAN Speed GhostKEY Lock Remote Freq1NORMAL 2HIGH Control portSerial Settings Communication TypeBaud Rate ParityResponse Limit Time Transmission MethodFactory Reset InformationNetwork menu DhcpDynamic Host ConfigurationAddress MaskDifference TimeProjector Name MY Image AMX D.DQuit PresenterPresentation Section Switching Guide If you have forgotten your password Security menuEnter the Security menu Turning on the MyScreen Password Turning off the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN codeTransition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password MY Text WritingPresentation tools PC-LESS PresentationSupported storage media Supported formatThumbnail mode Setup menu for the selected image Operating by buttons or keysDown Enter InputOperating by the menu on the Thumbnail screen PC-LESS Presentation DOWN, Right Down UP, LeftSlideshow mode Return Playlist Example of playlist.txt filesUSB Display Hardware and software requirement for computerUSB Port USB cable 1 piece Right-Click menu Keep PC resolution Optimize PerformanceTransmission speed Image qualityMaintenance Replacing the lampType number DT01021 Replacing the lampHigh Voltage High Temperature High Pressure Lamp warningCleaning and replacing the air filter Type number MU06481 Filter setCleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032 or CR2032HCaring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesMessage Description Internal temperature is rising Related messagesRegarding the indicator lamps Power Lamp TempIndicator OffResetting all settings Power Lamp Temp indicator indicator indicator DescriptionShutting the projector down Signal source does not correctly work Phenomenon Cases not involving a machine defectSignal cables are not correctly connected Volume is adjusted to an extremely low levelAudio SOURCE/SPEAKER setting is not correct Mode selected for Hdmi Audio is not suitableColor settings are not correctly adjusted Color Space setting is not suitableProjector is operating in Eco mode Freeze function is workingNetwork BridgeSpecifications SpecificationSpecifications End User License Agreement for the Projector Software

CP-X4011N, CP-X2511N, CP-X3011N specifications

The Hitachi CP-X3011N, CP-X2511N, and CP-X4011N are three prominent models in the lineup of projectors designed for educational and corporate environments. These projectors are celebrated for their reliability, performance, and advanced features, making them suitable for various presentation needs.

The CP-X3011N is characterized by a brightness of 3,100 lumens, which allows for clear and vibrant images even in well-lit environments. With a native XGA resolution of 1024 x 768, it delivers sharp images that are ideal for displaying detailed presentations and video content. The projector employs advanced technology such as a 3LCD system, which ensures accurate color reproduction and exceptional image quality. The lens operation is also notable, with a 1.2x optical zoom that provides flexibility in positioning.

In contrast, the CP-X2511N offers a slightly lower brightness at 2,600 lumens but maintains the same native XGA resolution. This projector is designed for environments where budget is a consideration while still providing excellent performance. It features a lightweight design, making it easily portable for on-the-go presentations. The CP-X2511N also incorporates energy-saving technology that helps reduce the overall power consumption, contributing to lower operational costs.

The CP-X4011N, on the other hand, stands out with a brightness of 4,200 lumens, making it one of the brightest models in this series. This makes it an excellent choice for larger venues or spaces with significant ambient light. The projector supports both XGA and WXGA resolutions, giving users the option for enhanced image detail with widescreen presentations.

All three models boast a variety of connectivity options, including HDMI, VGA, and USB ports, accommodating various devices and media formats. They also feature advanced networking capabilities for remote management, allowing IT administrators to monitor multiple projectors on a single platform.

Additionally, the projectors come equipped with a range of user-friendly features such as automatic keystone correction, which ensures images are aligned and distortion-free, and a quick start function that allows users to begin their presentations with minimal downtime.

With their robust performance and strategic feature set, the Hitachi CP-X3011N, CP-X2511N, and CP-X4011N projectors are designed to meet the demands of any professional presentation or educational setting.