Hitachi CP-X2511N Turning on the Transition Detector, Turning off the Transition Detector

Page 70
ENTER PASSWORD box
(large)
ENTER NEW PASSWORD
box (small)

SECURITY menu

Item

Description

TRANSITION

DETECTOR

If this function is set to ON when the vertical angle of the projector or MIRROR setting at which the projector is turned on is different than the previously recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal.

•To display the signal again, set this function OFF.

•After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp will turn off.

•Keystone adjustment feature has been prohibited as long as the Transition Detector function is on.

1 Turning on the TRANSITION DETECTOR

1-1 Use the ▲/▼ buttons on the SECURITY menu to select TRANSITION DETECTOR and press the ► or the ENTER button to display the TRANSITION DETECTOR on/off menu.

1-2 Use the ▲/▼ buttons on the TRANSITION DETECTOR on/off menu to select ON. Select ON and the current angle and MIRROR setting will be recorded. The ENTER NEW PASSWORD box (small) will be displayed.

1-3 Use the ▲/▼/◄/► buttons to enter a password. Move the cursor to the right side of the ENTER NEW PASSWORD box (small) and press the ► button to display the NEW PASSWORD AGAIN box, enter the same password again.

1-4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the ► button to display the NOTE NEW PASSWORD box for about 30 seconds,

please make note of the password during this time.

Pressing the ENTER button on the remote control or the ► button on the projector will return to the TRANSITION DETECTOR on/off menu.

•Please do not forget your TRANSITION DETECTOR password.

•This function will activate only when the projector is started after turning off the AC power.

•This feature may not function properly if the projector is not in a stable position when ON is selected.

2 Turning off the TRANSITION DETECTOR

2-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu. 2-2 Select OFF to display the ENTER

PASSWORD box (large). Enter the registered password and the screen will return to the TRANSITION DETECTOR on/off menu.

If an incorrect password is input, the menu will close. If necessary, repeat the process from 2-1.

3 If you have forgotten your password

3-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu. 3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit

Inquiring Code will be displayed inside the box.

3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is confirmed.

(continued on next page) 70

Downloaded from www.Manualslib.com manuals search engine

Page 69 Page 71
Image 70
Page 69 Page 71
Contents CP-X2011N/CP-X2511N /CP-X3011N/CP-X4011N About this manualThank you for purchasing this projector Trademark acknowledgmentContents Features Checking the contents of packageProjector Part namesHOT LAN port Control panel STANDBY/ON buttonRear panel 9 ~ USB Type a port Audio OUT L,R portsDown button Volume + button Remote controlComputer button Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Connecting with your devices About Plug-and-Play capabilityConnecting with your devices VCR/DVD/Blu-ray Disc Computer PlayerConnecting with your devices Monitor Microphone system SpeakersUSB storage Device Computer Access point Connecting to a power supply Using the security bar and slotAbout the remote control signal Remote controlInstalling the batteries Hitachi MAXELL, Part No.LR6 or R6PUsing as a simple PC mouse & keyboard Changing the frequency of remote control signalUSB port Turning off the power Power on/offTurning on the power STANDBY/ON buttonOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundVideo button Press the MY Source / DOC. Camera button onComputer button MY SourceSelecting an aspect ratio Searching an input signalFor an Hdmi signal Search buttonAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the positionCorrecting the keystone distortions Keystone buttonUsing the magnify feature Magnify ON/OFF buttonFreeze button Temporarily freezing the screenTemporarily blanking the screen Blank buttonEasy Menu Using the menu functionReset button Advanced MenuIndication in OSD On Screen Display Indication MeaningNormal Cinema Dynamic Boardblack DescriptionDaytime Whiteboard Boardgreen Language ECO ModeMirror SecurityPicture menu GammaCustom SAVE-1, SAVE-2, SAVE-3, SAVE-4 Presentation Theater OFFActive Iris MY Memory LOAD-1,LOAD-2,LOAD-3,LOAD-4Image menu For a computer signalFor an Hdmi signal AspectPosition USB Type B or Hdmi portFrom the LAN, USB Type A, USB Type B or Hdmi port For a video signal and s-video signalFor a component video signal SizeHigh MID LOW Input menuTV Film OFF Component Scart RGBHdmi Format Video FormatHdmi Range Frame Lock Auto Sync on G OFFOn OFF Resolution Auto Keystone Setup menuKeystone Normal Saving Normal ECONormal Hinvert Vinvert H&VINVERT Monitor OUTAudio menu 480i@60 for COMPONENT, Computer IN1 or Computer IN2MIC Level MIC VolumeHdmi Audio High LOWBlank Screen menuEnglish Français Deutsch Español Start UPMyScreen Capturing error has occurred. Please try againMyScreen registration is finished Invalid Scan Freq No Input is DetectedSync is OUT of Range MessageUse the / buttons on the Screen menu to select Source Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3 MAP2 MAP1 CIRCLE2 CIRCLE1 DOT-LINE4Mode Description Closed CaptionDisplay ChannelUSB Type B port Option menuAuto USB Type B OFFMouse USB Display Type B portCancel OK Lamp TimeMY Button X4011N Computer IN1 Computer IN2 LAN USB Type aFAN Speed ServiceAuto Adjust Ghost1NORMAL 2HIGH KEY LockRemote Freq Control portBaud Rate Serial SettingsCommunication Type ParityResponse Limit Time Transmission MethodFactory Reset InformationDynamic Host Network menuDhcp ConfigurationDifference AddressMask TimeProjector Name MY Image AMX D.DPresenter QuitPresentation Section Switching Guide Security menu If you have forgotten your passwordEnter the Security menu Turning off the MyScreen Password Turning on the MyScreen PasswordMyScreen Turning off the PIN Lock PIN LockTurning on the PIN Lock If you have forgotten your PIN codeTurning on the Transition Detector Transition DetectorTurning off the Transition Detector Turning on the MY Text Password MY Text PasswordTurning off the MY Text Password MY Text WritingSupported storage media Presentation toolsPC-LESS Presentation Supported formatThumbnail mode Down Setup menu for the selected imageOperating by buttons or keys Enter InputOperating by the menu on the Thumbnail screen PC-LESS Presentation DOWN, Right Down UP, LeftSlideshow mode Return Playlist Example of playlist.txt filesHardware and software requirement for computer USB DisplayUSB Port USB cable 1 piece Right-Click menu Transmission speed Keep PC resolutionOptimize Performance Image qualityType number DT01021 MaintenanceReplacing the lamp Replacing the lampHigh Voltage High Temperature High Pressure Lamp warningCleaning and replacing the air filter Type number MU06481 Filter setCleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032 or CR2032HInside of the projector Caring for the cabinet and remote controlOther care Caring for the lensRelated messages TroubleshootingMessage Description Internal temperature is rising Related messagesIndicator Regarding the indicator lampsPower Lamp Temp OffPower Lamp Temp indicator indicator indicator Description Resetting all settingsShutting the projector down Signal source does not correctly work Phenomenon Cases not involving a machine defectAudio SOURCE/SPEAKER setting is not correct Signal cables are not correctly connectedVolume is adjusted to an extremely low level Mode selected for Hdmi Audio is not suitableProjector is operating in Eco mode Color settings are not correctly adjustedColor Space setting is not suitable Freeze function is workingNetwork BridgeSpecifications SpecificationSpecifications End User License Agreement for the Projector Software

CP-X4011N, CP-X2511N, CP-X3011N specifications

The Hitachi CP-X3011N, CP-X2511N, and CP-X4011N are three prominent models in the lineup of projectors designed for educational and corporate environments. These projectors are celebrated for their reliability, performance, and advanced features, making them suitable for various presentation needs.

The CP-X3011N is characterized by a brightness of 3,100 lumens, which allows for clear and vibrant images even in well-lit environments. With a native XGA resolution of 1024 x 768, it delivers sharp images that are ideal for displaying detailed presentations and video content. The projector employs advanced technology such as a 3LCD system, which ensures accurate color reproduction and exceptional image quality. The lens operation is also notable, with a 1.2x optical zoom that provides flexibility in positioning.

In contrast, the CP-X2511N offers a slightly lower brightness at 2,600 lumens but maintains the same native XGA resolution. This projector is designed for environments where budget is a consideration while still providing excellent performance. It features a lightweight design, making it easily portable for on-the-go presentations. The CP-X2511N also incorporates energy-saving technology that helps reduce the overall power consumption, contributing to lower operational costs.

The CP-X4011N, on the other hand, stands out with a brightness of 4,200 lumens, making it one of the brightest models in this series. This makes it an excellent choice for larger venues or spaces with significant ambient light. The projector supports both XGA and WXGA resolutions, giving users the option for enhanced image detail with widescreen presentations.

All three models boast a variety of connectivity options, including HDMI, VGA, and USB ports, accommodating various devices and media formats. They also feature advanced networking capabilities for remote management, allowing IT administrators to monitor multiple projectors on a single platform.

Additionally, the projectors come equipped with a range of user-friendly features such as automatic keystone correction, which ensures images are aligned and distortion-free, and a quick start function that allows users to begin their presentations with minimal downtime.

With their robust performance and strategic feature set, the Hitachi CP-X3011N, CP-X2511N, and CP-X4011N projectors are designed to meet the demands of any professional presentation or educational setting.
Top Page Image Contents