Hitachi HTS541660J9SA00, HTS541640J9SA00 manual Mounting orientation, Load/unload mechanism, 33/167

Page 33

Travelstar 5K160 (SATA) Hard Disk Drive Specification

6.4.3Mounting orientation

The drive will operate in all axes (six directions) and will stay within the specified error rates when tilted ±5 degrees from these positions.

Performance and error rate will stay within specification limits if the drive is operated in the other permissible orientations from which it was formatted. Thus a drive formatted in a horizontal orientation will be able to run vertically and vice versa.

The recommended mounting screw torque is 0.3±0.05 Nm.

The recommended mounting screw depth is 3.0±0.3 mm for bottom and 3.5±0.5 mm for horizontal mounting.

The user is responsible for using the appropriate screws or equivalent mounting hardware to mount the drive securely enough to prevent excessive motion or vibration of the drive at seek operation or spindle rotation.

6.4.4Load/unload mechanism

The head load/unload mechanism is provided to protect the disk data during shipping, movement, or storage. Upon power down, a head unload mechanism secures the heads at the unload position. See section 6.6.4, "Nonoperating shock" on page 36 for additional details.

33/167

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 167 Hitachi Travelstar 5K160Copyright Hitachi Global Storage Technologies Table of Contents 11.6 14.30 Limits of temperature and humidity Read Verify Sectors Ext Command 42h List of Tables General Introduction AbbreviationsCapacity GB 10/167 ISO11/167 References Drive handling precautionsGeneral caution 12/16713/167 Outline of the drive14/167 Part 1 Functional SpecificationFixed disk subsystem description Head disk assembly dataControl Electronics 15/167Formatted capacity by model number Fixed disk characteristicsDescription HTS541616J9SA00 HTS541612J9SA00 Physical Layout Logical LayoutData sheet Cylinder allocation80GB/p format Zone Command overhead Performance characteristicsFunction 18/167Average seek time including settling Mechanical positioningFull stroke seek Average latencyCondition Typical sec Drive ready timeMax. sec Ready 20/167Operating mode at power on Mode transition timeAdaptive power save control Operating modesWrite safety Data loss on power offData integrity Write CacheError recovery Data buffer testAutomatic reallocation 24/167 ECCTemperature and humidity SpecificationEnvironment Corrosion testConductive noise Radiation noiseMagnetic fields Frequency KHz Limits uT RMSDC power requirements Requirements27/167 Power consumption efficiency Power consumption efficiency 28/167Capacity 160GB 120GB 80GB 40GB Reliability Service life and usage conditionData reliability Failure prediction S.M.A.R.TRequired Power-Off Sequence Preventive maintenancePower switch design considerations Load/unload31/167 Test considerationsMechanical specifications Physical dimensions and weightMounting hole locations Mounting orientation Load/unload mechanism33/167 Operating vibration Vibration and shockRandom vibration Swept sine vibrationNonoperating vibration Operating shockNonoperating shock Weighted Sound Power Typical Bels Maximum Bels Sound power levelMode definitions AcousticsElectromagnetic compatibility Identification labelsSafety PackagingSubstance restriction requirements Interface connector Electrical interface specificationsCabling 39/167Plug Connector pin definition Signal Signal definitions1 TX+ / TX 2 RX+ / RXShows the timing of COMRESET, Cominit and Comwake Out of band signaling42/167 Part 2 Interface SpecificationIntroduction GeneralTerminology Device Device indicates HTS5416XXJ9SA00 HostPhysical Interface Deviations from StandardRegisters Register naming conventionError Register Command registerDevice Control Register Device RegisterLBA High Register Features RegisterLBA Low Register LBA Mid RegisterStatus Register Sector Count RegisterReset Response General Operation DescriptionsRegister Initialization Diagnostic and Reset considerations Power-off considerationsExecute Device Diagnostic Required power-off sequence Sector Addressing ModeLogical CHS Addressing Mode Emergency unloadLBA Addressing Mode Power Management FeaturePower Mode Power Management CommandsInterface Capability for Power Modes Standby/Sleep command completion timingInitial Power Mode at Power On StatusPerformance Idle mode Interface Power Management Mode Slumber and PartialActive Idle mode Low Power Idle mode12.8 S.M.A.R.T. Function 12.8.6 S.M.A.R.T operation with power management modes Security Mode Feature SetSecurity mode PasswordMaster Password setting Master Password Revision CodeUser Password setting Operation from POR after User Password is set57/167 User Password LostAttempt limit for Security Unlock command Command TableCommand table for device lock operation 59/167 Protected Area Function Read Native Max Address ‘F8’h Set Max Address ‘F9’h60/167 Capacity native 536,870,912 Example for operation In LBA modeSet Max security extension commands Word Content17-255 Write Cache Function Seek OverlapReassign Function 63/167Non recovered write errors 12.14 48-bit Address Feature SetNon recovered read errors Recovered read errorsNative Command Queuing Software Setting Preservation Feature SetPreserved software settings Setting ContentsCommand Protocol Data In Commands66/167 Non-Data Commands Data Out CommandsFirst-parity DMA Commands DMA Data Transfer CommandsRead DMA Read DMA Ext Write DMA Write DMA Ext Read Fpdma Queued Write Fpdma QueuedCommand Descriptions A.R.T. Read Attribute Thresholds A.R.T. Read Log Sector Protocol Command Code HexWrite Log Ext Write Sectors Write Sectors ExtCommand Subcommand Command code Feature Hex Output RegistersIndicates that the bit must be set to 71/167 72/167 Input RegistersRegister Data Feature Error See Below Check Power Mode E5h/98hDevice Command Status See Below Error Register Sector Count LBA Low LBA Mid LBA HighDevice Configuration Overlay B1h Device Configuration Restore subcommand C0hDevice Configuration Freeze Lock subcommand C1h Device Configuration SET subcommand C3h Device Configuration Identify subcommand C2hLBA High 03h = word 3 is invalid LBA Mid 00h Sector count 06h = Protected area is now established= Ultra DMA mode 2 and below are supported = Ultra DMA mode 3 and below are supported= Ultra DMA mode 1 and below are supported = Ultra DMA mode 0 is supported77/167 Execute Device Diagnostic 90hFlush Cache E7h Command Block Output RegistersLBA Low Current Flush Cache Ext EAhLBA Mid Current LBA High CurrentFormat Track 50h Vendor Specific Output Parameters To The Device LBA LowLBA High/Mid 81/167 Format Unit F7h Vendor SpecificIdentify Device ECh Number of heads in default translate modeIdentify Device response is complete 37C8h0003H 00xxH 10-19 23-26 27-46Travelstar 5K160 Sata Hard Disk Drive Specification Requests Native Command Queuing supportedSata Gen-2 speed 3.0Gbps supported Sata Gen-1 speed 1.5Gbps supported00FCH =WRITE DMA Queued FUA EXT command =IDLE Immediate with Unload FeatureFUA EXT commands supported =General Purpose Logging feature set supported=READ/WRITE DMA Queued command Enabled112-118 0000H Reserved 119 4000H Maximum user LBA address for 48-bit Address feature set word Output Parameters To The Device Idle E3h/97h92/167 Idle Immediate E1h/95hInitialize Device Parameters 91h 94/167 Read Buffer E4hOutput Parameters To The Device Sector Count Read DMAC8h/C9h96/167 Read DMA Ext 25hData left by previously processed Read or Write commands Read Fpdma Queued 60h97/167 Log Address definition 98/167 Read Log Ext2FhGeneral purpose Log Directory Extended comprehensive Smart error logError log index Error Log versionExtended Error log data structure 100/167Device error count Extended Self-test log sector101/167 Self-test log data structure revision number Command ErrorSelf-test descriptor index Extended Self-test log descriptor entryPhy Event Counter Counter Reset MechanismsCounter Identifiers 103/167Phy Event Counter Identifier Read Log Ext Log Page 11hPhy Event Counter information 104/167Read Long 22h/23h Read Multiple C4h Read Multiple Command C4hOutput Parameters To The Device Sector Count Current Read Multiple Ext 29hLBA Low Current Input Parameters From The Device LBA Low HOB=0Read Native Max Address F8h 109/167 Read Native Max Address Ext 27hRead Sectors 20h/21h Head number of the last transferred sector. L=0110/167 111/167 Read Sectors Ext 24hRead Verify Sectors 40h/41h Error occursWill be verified 112/167113/167 Read Verify Sectors Ext 42h114/167 Recalibrate 1xhSecurity Disable Password F6h 116/167 Security Erase Prepare F3hIdentifier Security Erase Unit F4hHTS541612J9SA00 HTS541616J9SA00HTS541680J9SA00 HTS541660J9SA00Security Freeze Lock F5h 01-16 Password 32 bytes 17-18 Security Set Password F1hSecurity level 1-Maximum, 0-High 19-255 ReservedSecurity Level PasswordRevision Code Identifier=User / Security level = HighRegards Password as Master Password Security Unlock F2hIdentifier 1-Master, 0-User Cylinder number of the seek Seek 7xhSeek. L=1 Head number of the seekSense Condition F0h vendor specific Output Parameters To The Device FeatureSet Features EFh Deepest Power Saving mode is Low power Idle Set Max Address F9h Input Parameters From The Device LBA Low 04hSet Max Address Ext 37h 130/167 Set Multiple C6h 132/167 Sleep E6h/99h14.40.1.1S.M.A.R.T. Read Attribute Values Subcommand D0h 14.40.1 S.M.A.R.T. Sub commands14.40 S.M.A.R.T Function Set B0h 133/16714.40.1.4S.M.A.R.T. Save Attribute Values Subcommand D3h Status ErrorLBA Mid LBA High14.40.1.7S.M.A.R.T. Write Log Sector Subcommand D6h 14.40.1.6S.M.A.R.T. Read Log Sector Subcommand D5h14.40.1.8S.M.A.R.T. Enable Operations Subcommand D8h 136/16714.40.1.10 S.M.A.R.T. Return Status Subcommand DAh 14.40.1.9S.M.A.R.T. Disable Operations Subcommand D9hF8h Enable Automatic Off-line F9h 137/167Device Attributes Data Structure Data Structure Revision Number138/167 Attribute Name Individual Attribute Data StructureSelf-test execution status Off-Line Data Collection StatusBit Automatic Off-Line Data Collection Status Value DefinitionCurrent Segment Pointer Error Logging CapabilityOff-Line Data Collection Capability 14.40.2.8 S.M.A.R.T. CapabilitySelf-test completion time Device Attribute Thresholds Data StructureData Structure Checksum Individual Thresholds Data Structure14.40.4 S.M.A.R.T. Log Directory 14.40.5 S.M.A.R.T. error log sectorAttribute ID Numbers Attribute Threshold14.40.5.1 S.M.A.R.T. error log version Error log pointerError log data structure Selective self-test log data structure Self-test log data structureError Reporting Error Condition1FCh Reserved 1FEh Data structure checksum 1FFh 512 Standby E2h/96h 148/167 Standby Immediate E0h/94h149/167 Write Buffer E8hWrite DMA CAh/CBh Contains current LBA bits 24 27. L=1150/167 151/167 Write DMA Ext 35h152/167 Write DMA FUA Ext 3DhWrite Fpdma Queued 61h Output Parameters To The Device Feature Current154/167 Write Log Ext 3FhWrite Long 32h/33h Write Multiple C5h 157/167 Write Multiple Ext 39h158/167 Write Multiple FUA Ext CEh159/167 Write Sectors 30h/31h160/167 Write Sectors Ext 34hTimings Erase Unit F4h on Specific on162/167 Index Environment Mounting orientation Non-data commandsPower management features Physical dimensions PIO Data In commandsService life Set Features Shock Signal definitions Sleep166/167 149Copyright Hitachi Global Storage Technologies
Related manuals
Manual 2 pages 51 Kb

HTS541640J9SA00, HTS541616J9SA00, HTS541680J9SA00, HTS541612J9SA00, HTS541660J9SA00 specifications

The Hitachi HTS541660J9SA00, HTS541640J9SA00, HTS541616J9SA00, HTS541680J9SA00, and HTS541612J9SA00 are a series of hard disk drives that showcase Hitachi's commitment to high-performance storage solutions. These drives belong to the Travelstar series, which is designed primarily for mobile computing applications, such as laptops and external storage devices. Their compact design and reliable performance make them suitable for users seeking efficient storage in portable settings.

One of the primary features of these drives is their SATA interface, which allows for fast data transfer rates, thereby enhancing overall system performance. The SATA II interface provides a maximum transfer rate of up to 3.0 Gbps, ensuring that these drives can keep up with the demands of modern computing.

The storage capacity of these models varies, with options such as 160GB, 250GB, and 320GB, catering to diverse user needs for both personal and professional use. The HTS541660J9SA00 provides a generous 160GB capacity, while the HTS541680J9SA00 offers up to 320GB, making them suitable for users who require significant storage space for media files, applications, and documents.

In terms of performance, these hard drives boast a rotational speed of 5400 RPM, striking an optimal balance between speed and energy efficiency. This speed ensures relatively quick access times while consuming less power compared to faster 7200 RPM drives, making them ideal for battery-powered devices.

Another significant characteristic of these drives is the use of Hitachi’s Advanced Format technology. This technology increases the physical sector size of the drives to 4KB, enhancing error correction and overall data integrity. This larger sector size allows for greater data efficiency, significantly reducing the overhead associated with data storage.

Furthermore, these drives are designed with Shock Protection technology, which helps to safeguard the drive's internal components from physical shocks caused by accidental drops or bumps. This feature is especially important for mobile storage solutions, where portability can lead to unintentional impacts.

In conclusion, the Hitachi HTS541660J9SA00, HTS541640J9SA00, HTS541616J9SA00, HTS541680J9SA00, and HTS541612J9SA00 hard disk drives are exemplary choices for anyone seeking reliable, efficient, and portable storage solutions. With their combination of adequate capacity, enhanced data management technologies, and robust design, these drives effectively meet the demands of today’s mobile computing needs.
Top Page Image Contents