Hitachi CP-S845W Basic operations, To project the picture, On indicator will light up orange

Basic operations

To project the picture

4

3

5

2		2	STANDBY/ON	MUTE
			FREEZE
STANDBY/ON			MAGNIFY VOLUME
	INPUT		OFF
MUTE			POSITION ON	LASER
	MENU	7
RESET
			RESET	RIGHT
		7	MENU ON	MOUSE ON
			BLANK	TIMER
			RGB	VIDEO
			INPUT

ENGLISH

1

1	Turn the MAIN POWER switch of the projector on.[ I : ON]
	• The ON indicator will light up orange.
2	Press the STANDBY/ON button.
	• The ON indicator blinks (green) during warm-up and then lights (green).

• Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after power is turned off, since the lamp has cooled preparing for next lighting.

3	Remove the lens cap.
4	Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
6	Power on all connected equipment.
	The method of connecting various equipment, see on the page 20~28.
7	Press the INPUT button or the INPUT SELECT (VIDEO or
	RGB) button to select the source of the signal to be projected
	on the screen.	Example on-screen display
	• The selected signal input is displayed at the bottom right of the screen
	for 3 seconds.
			RGB1

13

Downloaded from www.Manualslib.com manuals search engine