Installation
Example of the projector and screen installation
Determine picture size and projection distance as illustrated below.
View from the top | View from the side |
Screen
Lens center
a
Screen (inch) | a (inch) | |||
|
|
|
| |
| Minimum | Maximum | ||
|
|
|
|
|
40 | 64 | 84 |
| |
|
|
|
|
|
60 | 97 | 127 |
| |
|
|
|
|
|
80 | 130 | 169 |
| |
|
|
|
|
|
100 | 163 | 213 |
| |
|
|
|
|
|
120 | 196 | 256 |
| |
|
|
|
|
|
150 | 244 | 319 |
| |
|
|
|
|
|
200 | 326 |
|
|
|
|
|
| ||
|
|
|
|
|
a:Distance from the projector to the screen. (tolerance : ±10%)
This screen size is
Installation of liquid crystal projector
Please basically use liquid crystal projector at the horizontal position.
If you use liquid crystal projector by the lens up position, the lens down position and the side up position, this may cause the heat inside to build up and become the cause of damage.
Be especially careful not to install it with ventilation holes blocked.
How to use foot adjusters
Adjust the projection position using the foot adjusters at the bottom of the projector.
View from the front | View from the side |
Foot adjuster
Vertical adjustments can be made in the range of 0 to 9°.
Horizontal inclination may be adjusted using the adjuster at the rear.
1.Lift up the projector and press the button of the adjuster to release the lock.
2.Adjust the projection angle, release the button of the adjuster and securely lock it.
3.To adjust the angle slightly, revolve the foot adjusters.
Caution
•Do not unlock the foot adjusters while you do not support the projector, to avoid falling of the projector and causing an injury.
•Do not revolve the foot adjusters by force, the foot adjusters is damaged.
•Securely lock the adjuster.
•Do not apply unnecessary force from the upper side when lifting the projector. Otherwise, projector may be damaged or a finger could be caught and cause injury.
12
Downloaded from www.Manualslib.com manuals search engine