Hitachi SJ-FB manual location of specification labels

Chapter 5 SETTING

(Note 1) : Please refer to the instruction manual of the inverter main body as to the setting procedure.

(Note 2): When the over speed abnormal detection level (P026), the speed error over detection level (P027) are set 0, the Abnormal detection data processing will be invalid.

(Note 3): Regarding the SJ-FB setting, there are some warning about what type of main body combines with the SJ-FB which is written following list.

			Main body of SJ300 Production No (MFG No) (Note 4)
			9 8 XXXXXXXXXXXX
			9 9 XXXXXXXXXXXX	others
No.	Item		9 O XXXXXXXXXXXX
			9 J XXXXXXXXXXXX
			9 K XXXXXXXXXXXX
			0 1 XXXXXXXXXXXX
1	Completion		Range of setting: 0.00 - 9.99 (X10(sec))	Range of setting: 0.00 - 9.99 (X1(sec))
	delay	time	(Example) In order to operate the completion	( Example) In order to operate the completion
	setting	for	delay time setting for orientation for 1(sec). Set	delay time setting for orientation for 1(sec). Set
	orientation		P018 setting which is written below.	P018 setting which is written below.
	(P018)		P018=1(sec)/10(sec) =0.10	P018=1(sec) / 1(sec)=1.00
2	Over	speed	Range of setting: 0.0 - 150.0 (X100)	Range of setting: 0.0 - 150.0 (X1%)
	abnormal		(Example) In order to operate the over speed	(Example) In order to operate the over speed
	detection		detection level at 66Hz while maximum	detection level at 66Hz, while maximum
	level		frequency is 60Hz. Set P026 setting which is	frequency is 60Hz. Set P026 setting which is
			written below.	written below.
			P026=66Hz / 60Hz=1.1	P026=66Hz / 60HzX100=110.0

(Note 4) The SJ300 Production number (MFG No) is printed on the main body of the SJ300 specifications label. Refer to figure 5-2(1), figure 5-2(2).

Specifications label

Figure 5-2(1) location of specification labels

Inverter model

Maximum applicable motor

Input ratings

Output ratings

Production number

Figure 5-2 (2) Contents of specification label

19