Embedded Gigabit Ethernet Switch
The Embedded Gigabit Ethernet Switch is contained in the Switch & Management Module and is a managed,
Figure 23. Back view of chassis with blow up of Embedded Gigabit Ethernet Switch
The Embedded Gigabit Ethernet Switch can be configured for high availability and fault tolerance when a second, redundant switch module is added. A single switch interconnects one (of two) gigabit Ethernet connections from each blade server blade (up to eight total). The second redundant switch interconnects each of the remaining gigabit connections for each server blade , so a single switch failure allows networking operations to continue on the remaining switch. If additional network bandwidth or connectivity is needed, PCI slots can be utilized for additional NICs. Switch features are listed in Table 9.
www.hitachi.com | BladeSymphony 1000 Architecture White Paper 33 |