Hitachi SJ-DG instruction manual Otherwise, there is a danger of electric shock and/or fire

Page 4

SAFETY PRECAUTIONS

!WARNING

Wiring:

∙Wiring work shall be carried out by electrical experts

Otherwise, there is a danger of electric shock, fire and/or damage of product.

∙Implement wiring after checking that the power supply is off.

Otherwise, there is a danger of electric shock and/or fire.

Operating:

∙Be sure not to touch the surface or the terminal of option board while energizing.

Otherwise, there is a danger of electric shock and/or fire.

∙Be sure not to remove the digital input option printed board while operating.

Otherwise, there is a danger of electric shock and/or fire.

Maintenance, Inspection and Part Replacement:

∙Wait at least 10 minutes after turning off the input power supply before performing maintenance and inspection.

(Confirm the charge lamp on the inverter is off, checks direct current voltage between P-N terminals and confirm it is less than 45V.)

Otherwise, there is a danger of electric shock.

∙Make sure that only qualified persons will perform maintenance, inspection, and part replacement (Before starting the work, remove metallic objects from your person (wristwatch, bracelet, etc.). Be sure to use tools protected with insulation)

Otherwise, there is a danger of electric shock, and/or injury.

Note:

∙Never modify the unit.

Otherwise, there is a danger of electric shock and/or injury.

!CAUTION

Installation:

∙Be sure not to let the foreign matter enter such as wire clippings, spatter from welding, metal shaving, dust, etc.

Otherwise, there is a danger of fire.

∙Be sure to fix inverter to option printed board with an attached fixed screw.

Otherwise, there is a danger of connecting error.

∙Be sure to fasten the screws connecting signal wire in side of option printed board. Check for any loosening of screw.

Otherwise, there is a danger of connecting error.

Wiring:

∙Be sure to fasten the screws not to loose.

Otherwise, there is a danger of connecting error.

Operation:

∙Check rotary direction, abnormal motor noise and vibrations during operating.

Otherwise, there is a danger of injury to personnel and/or machine breakage.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Hitachi Inverter SJ300/L300P SeriesRevision History Table Safety Precautions Otherwise, there is a danger of connecting error Otherwise, there is a danger of electric shock and/or fireOtherwise, there is a danger of electric shock Otherwise, there is a danger of fireSafety Precautions Page Inquiry of the Product and Warranty for the Product Warranty of the ProductInspection Upon Unpacking Outline of the ProductInstallation Method of Printed Board Installation of option printed boardTerminal Assignment of Digital Input Option Board PlcbCase of using external power source Connection to Programable ControllerApplicable Wiring Specification of TerminalSpecification of terminal Position of Setting Switch Initial Setting Condition of Printed BoardSetting of Inverter Input Mode by DIP Switch and Rotary SwitchTable of input mode OFFType Code BIN PAC Type Code BCD DIVPrecautions AT Setting of Switch Function ONE Time Binary InputONE Time BCD Input BIN PACTWO Dividing Binary Input BIN DIVTWO Dividing BCD Input BCD DIVClassification Code Data Input TimingTiming AT ONE Time Input MO DE Table of classification code2 Timing chart of two dividing data input Timing AT TWO Dividing Data InputBCD
Top Page Image Contents