Hitachi SJ-DG Installation Method of Printed Board, Installation of option printed board

Page 8

CHAPTER 2 INSTALLATION METHOD OF PRINTED BOARD

2.1 INSTALLATION METHOD OF PRINTED BOARD

As the following Figure 2-1, exactly connect option board 1 or 2 to the holes of the four corners and the connector part of the back. Be sure to fit them to the guide post for positioning of option printed board and screw holes for fixing. After connecting, fastened the two points of printed board with the fixed screws attached.

Option board

Guide post for the positioning of option board

Option board 1

Option board 2

Screw holes for fixing option board (M3 screw)

Figure 2-1 Installation of option printed board

2

Image 8
Contents Hitachi Inverter SJ300/L300P SeriesRevision History Table Safety Precautions Otherwise, there is a danger of connecting error Otherwise, there is a danger of electric shock and/or fireOtherwise, there is a danger of electric shock Otherwise, there is a danger of fireSafety Precautions Page Inquiry of the Product and Warranty for the Product Warranty of the ProductInspection Upon Unpacking Outline of the ProductInstallation Method of Printed Board Installation of option printed boardTerminal Assignment of Digital Input Option Board PlcbCase of using external power source Connection to Programable ControllerSpecification of terminal Specification of TerminalApplicable Wiring Position of Setting Switch Initial Setting Condition of Printed BoardSetting of Inverter Input Mode by DIP Switch and Rotary SwitchTable of input mode OFFType Code BIN PAC Type Code BCD DIVPrecautions AT Setting of Switch Function ONE Time Binary InputONE Time BCD Input BIN PACTWO Dividing Binary Input BIN DIVTWO Dividing BCD Input BCD DIVClassification Code Data Input TimingTiming AT ONE Time Input MO DE Table of classification code2 Timing chart of two dividing data input Timing AT TWO Dividing Data InputBCD