Hitachi CP-X885W, CP-X880W user manual Turning on the Power, Selecting an Input Signal

Page 17

TURNING ON THE POWER (continued)

Selecting an Input Signal

5

Using the remote control

If selecting RGB input

Press the RGB button

Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time you press the RGB button, the projector switches between RGB IN 1 and 2. Select the signal you wish to project.

• When BNC (RGB) is selected:

RGB

RGB BNC(RGB) DVI

•When BNC (COMPONENT) is selected:

RGB DVI

If selecting video input Press the VIDEO button

Press this button to toggle between the

VIDEO

devices connected to VIDEO IN, S-VIDEO

 

IN and COMPONENT VIDEO. As

 

illustrated below, each time you press the

 

VIDEO button, the projector switches between VIDEO IN, S-VIDEO IN and COMPONENT VIDEO. Select the signal you wish to project.

•When BNC (RGB) is selected:

VIDEO IN S-VIDEO IN COMPONENT VIDEO

•When BNC (COMPONENT) is selected:

VIDEO IN S-VIDEO IN COMPONENT VIDEO

BNC(COMPONENT)

Using the projector's control panel

Turn the INPUT dial

Turning the dial cycles

B INPUT

through the inputs as

 

shown below. Select the

 

terminal to which the signal

 

you want to project is input.

 

•When BNC (RGB) is selected:

RGB BNC(RGB) DVI

COMPONENT VIDEO S-VIDEO VIDEO

•When BNC (COMPONENT) is selected:

RGB BNC(COMPONENT) DVI

COMPONENT VIDEO S-VIDEO VIDEO

NOTE

Turn the INPUT dial and set it at the click point, otherwise input signal selection may be incorrect.

6

Use the ZOOM

/

buttons to adjust

ZOOM

 

 

 

 

the screen size

 

 

 

ZOOM

 

 

 

 

(Control panel)

(Remote control)

7

Use the FOCUS

/

buttons to adjust

FOCUS

 

 

 

 

the focus

 

 

 

FOCUS

 

 

 

 

(Control panel)

(Remote control)

16

Downloaded from www.Manualslib.com manuals search engine

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CP-X880W / CP-X885W Contents Projector Features Connect your devices to the projector Devices you will be using to the projectorPart Names Remote Control Adjusting the Projectors Elevator Feet Setting UP the ProjectorPress and hold in the elevator Buttons Turn the elevator screw to fine tuneTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesDVI Input BNC InputConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Putting batteries into the remote control unit Using the Remote ControlRemove the battery cover Close the battery coverOperating the remote control Using the Remote ControlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Press the Volume button Adjusting the VolumeUse the lever switch / to adjust the volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureWas begun When BNC RGB is selected Adjusting Screen with ONE-TOUCHPress the ONE Touch button You can activate the following functions just byDisplaying Child Window P. IN. P Picture in Picture Selecting the Aspect RatioTemporarily Blanking the Screen Use the lever switch / to select Sharpness Then press Using the Menu FunctionsUse the lever switch To adjust the level Press the Menu buttonOperating the PC Screen Available Functions Remote Control OperationDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterOther Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Menu screen display Press the Menu button Menu selectionPICTURE-2 Menu PICTURE-1 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuBlank Start UPOption Menu Wireless MenuOption Menu Related Messages Power Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 Vol.2-7Dimension Diagram SpecificationsSpecification Unit mmWarranty and AFTER-SERVICE Signal Terminal Specification Signal Connector PIN AssignmentRGB in 1/2 Sub 15-pin ShrinkResolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalDatavsync Initial SET SignalsUSB Mouse Connection to the Mouse ControlConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolRS-232C Communication C4 D3 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Sales Europe GmbH Hitachi Europe GmbHHitachi Business Systems Nordic Hitachi France
Related manuals
Manual 56 pages 38.47 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.
Top Page Image Contents