Hitachi CP-X885W, CP-X880W Operating the PC Screen, Available Functions Remote Control Operation

Page 27

OPERATING THE PC SCREEN

You can use the remote control as a simplified mouse or keyboard.

CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.

•Only connect to a PC.

•Before connecting, read the manuals of the device you will connect.

•Do not unplug the connector cables while the computer is operating.

LASER

INDICATOR

STANDBY/ON VIDEO RGB

 

UP

FOCUS ZOOM

PAGE

 

DOWN

BLANK

LASER

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION AUTO PinP

MAGNIFY

VOLUME

ON

 

FREEZE

MUTE

OFF

 

WIRELESS KEYSTONE

ONE TOUCH

PS/2, ADB, Serial Mouse Control

1.Turn off the projector and PC power, and connect the projector’s CONTROL terminal to the computer via the mouse cable.

2.If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control function is given priority, and mouse control from the CONTROL terminal will not function.

3.Turn on the projector power, then the computer.

The functions in the table below can be controlled. If you have difficulty with control, restart the computer (either from the software or by pressing the restart button).

Available Functions

Remote Control Operation

 

 

 

Move Pointer

Move using

on the disk pad

 

 

 

Left click with mouse

Press the center

of the disk pad

 

 

Right click with mouse

Press the right mouse button

 

 

 

USB Mouse/Keyboard Control

1.Connect the projector’s USB terminal to a PC using a USB cable. The functions in the table below can be controlled.

Available Functions

 

Remote Control Operation

 

 

 

 

Move Pointer

 

Move using

on the disk pad

 

 

 

 

Left click with mouse

 

Press the center

of the disk pad

 

 

 

Right click with mouse

 

Press the right mouse button

 

 

 

 

Press the keyboard’s

keys

Press

 

 

 

 

Press the keyboard’s ENTER key

 

Press the ENTER button

 

 

 

Press keyboard’s PAGE UP key

 

Press PAGE UP button

 

 

 

Press keyboard’s PAGE DOWN key

 

Press PAGE DOWN button

 

 

 

Press keyboard’s ESC key

 

Press ESC button

 

 

 

 

NOTES

•It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g. track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

•The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

•The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

•This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

26

Downloaded from www.Manualslib.com manuals search engine

Page 26 Page 28
Image 27
Page 26 Page 28
Contents CP-X880W / CP-X885W Contents Projector Features Connect your devices to the projector Devices you will be using to the projectorPart Names Remote Control Turn the elevator screw to fine tune Setting UP the ProjectorAdjusting the Projectors Elevator Feet Press and hold in the elevator ButtonsAdjusting the Screen Size and Projection Distance ScreenTop view Side view Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesDVI Input BNC InputConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Close the battery cover Using the Remote ControlPutting batteries into the remote control unit Remove the battery coverMeters with a 40-degree range Using the Remote ControlOperating the remote control Remote control in an area free from obstaclesTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Use the lever switch / to adjust the volumeAdjusting the Position Use the , , , buttons to adjust the positionPress the Position button Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting the distortion Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureYou can activate the following functions just by Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected Press the ONE Touch buttonSelecting the Aspect Ratio Temporarily Blanking the ScreenDisplaying Child Window P. IN. P Picture in Picture Press the Menu button Using the Menu FunctionsUse the lever switch / to select Sharpness Then press Use the lever switch To adjust the levelOperating the PC Screen Available Functions Remote Control OperationHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterCaring for the lens Caring for the cabinet and remote control transmitterOther Care Caring for the inside of the projectorFor Technical see the end of this manual Menu screen display Press the Menu button Menu selection Multifunctional SettingsMain Menu Main MenuPICTURE-2 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-1 MenuMultifunctional Settings Input MenuInput Menu Auto Menu Auto MenuStart UP Screen MenuScreen Menu BlankWireless Menu Option MenuOption Menu Related Messages Power Lamp Temp Regarding the Indicator LampsVol.2-7 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Unit mm SpecificationsDimension Diagram SpecificationWarranty and AFTER-SERVICE Sub 15-pin Shrink Signal Connector PIN AssignmentSignal Terminal Specification RGB in 1/2Resolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalDatavsync Initial SET SignalsUSB Mouse Connection to the Mouse ControlProtocol Command dataConsist of header 7 bytes + command data 6 bytes RS-232C CommunicationRS-232C Communication C4 D3 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi France Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi Business Systems Nordic
Related manuals
Manual 56 pages 38.47 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.
Top Page Image Contents