Hitachi CP-X880W, CP-X885W user manual Related Messages

Page 40

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED

Related Messages

When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below.

 

 

Message

 

 

 

Description

 

 

 

 

 

CHANGE THE LAMP

 

Lamp usage time is approaching 2,000 hours. (Note 2)

 

AFTER REPLACING LAMP,

 

Preparation of a new lamp, and an early lamp change, is

 

RESET THE LAMP TIMER.

 

recommended. After you have changed the lamp, please be

 

 

 

(Note 1)

sure to reset the lamp timer.

 

 

 

 

 

 

 

CHANGE THE LAMP

 

Lamp usage time is approaching 2,000 hours. A lamp change

 

 

within

hours is recommended. (Note 2)

 

AFTER REPLACING LAMP,

 

 

 

When lamp usage reaches 2,000 hours, the power will

 

RESET THE LAMP TIMER.

 

 

 

automatically be turned OFF. Please change the lamp by

THE POWER WILL TURN OFF

referring to “THE LAMP” (Vol.1 27 ). After you have

 

AFTER

hr.

 

changed the lamp, please be sure to reset the lamp

 

 

 

(Note 1)

timer.

 

 

 

 

 

 

 

 

CHANGE THE LAMP

 

As lamp use has reached 2,000 hours, the power will soon be

 

 

automatically turned OFF. (Note 2)

 

AFTER REPLACING LAMP,

 

 

 

Please immediately turn the power OFF, and follow the

 

RESET THE LAMP TIMER.

 

 

 

instructions in the “THE LAMP” (Vol.1 27 ).

THE POWER WILL TURN OFF

After you have changed the lamp, please be sure to reset the

 

 

AFTER 0 hr.

 

lamp timer. ( 7 )

 

 

 

 

 

 

 

 

 

 

CLEAN THE AIR FILTER

 

A note of precaution when cleaning the air filter.

 

AFTER CLEANING AIR FILTER,

After cleaning the filter, operate FILTER TIME of the OPTION

 

RESET THE FILTER TIMER.

 

Menu (

7 ), and perform reset of the filter timer.

 

 

 

 

 

 

 

NO INPUT IS DETECTED

 

There is no input signal.

 

 

Please confirm the signal input connection, and the status of the

 

 

ON

 

 

 

 

 

 

signal source.

 

 

 

 

 

 

 

 

 

 

 

 

SYNC IS OUT OF RANGE

 

The horizontal or vertical wavelength of the inputted signal is

 

 

outside of the response parameters of this unit. Please confirm

ON

fH

kHz

fV

Hz

the specs for this unit or the signal source specs.

 

 

 

 

 

 

 

 

 

 

 

The internal portion temperature is rising. Please turn the power

 

 

 

 

 

OFF, and allow the unit to cool down for approximately 20

 

 

 

 

 

minutes. After having confirmed the following items, then please

 

CHECK THE AIR FLOW

 

resent the power to ON.

 

 

 

 

 

• Is there blockage of the air passage aperture?

 

 

 

 

 

• Is the air filter dirty?

 

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

 

NOTES

Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be reappeared every time the power is turned ON.

Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped with an automatic shut-down function, such that the power will automatically be turned OFF when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this unit.

8

Downloaded from www.Manualslib.com manuals search engine

Image 40
Contents CP-X880W / CP-X885W Contents Projector Features Devices you will be using to the projector Connect your devices to the projectorPart Names Remote Control Setting UP the Projector Adjusting the Projectors Elevator FeetPress and hold in the elevator Buttons Turn the elevator screw to fine tuneScreen Adjusting the Screen Size and Projection DistanceTop view Side view Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI InputConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitRemove the battery cover Close the battery coverUsing the Remote Control Operating the remote controlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Adjusting the Volume Press the Volume buttonUse the lever switch / to adjust the volume Temporarily Muting the SoundUse the , , , buttons to adjust the position Adjusting the PositionPress the Position button Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenAdjusting Screen with ONE-TOUCH Was begun When BNC RGB is selectedPress the ONE Touch button You can activate the following functions just byTemporarily Blanking the Screen Selecting the Aspect RatioDisplaying Child Window P. IN. P Picture in Picture Using the Menu Functions Use the lever switch / to select Sharpness Then pressUse the lever switch To adjust the level Press the Menu buttonAvailable Functions Remote Control Operation Operating the PC ScreenLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the cabinet and remote control transmitter Other CareCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Multifunctional Settings Main MenuMain Menu Menu screen display Press the Menu button Menu selectionPICTURE-1 Menu PICTURE-2 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuBlank Start UPOption Menu Wireless MenuOption Menu Related Messages Regarding the Indicator Lamps Power Lamp TempPhenomena That May Easily Be Mistaken for Machine Defects Vol.2-2Vol.2-3 Vol.2-7Specifications Dimension DiagramSpecification Unit mmWarranty and AFTER-SERVICE Signal Connector PIN Assignment Signal Terminal SpecificationRGB in 1/2 Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals DatavsyncConnection to the Mouse Control USB MouseCommand data Consist of header 7 bytes + command data 6 bytesRS-232C Communication ProtocolRS-232C Communication Command data chart C4 D3Be EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi France
Related manuals
Manual 56 pages 38.47 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.