Hitachi CP-X880W, CP-X885W user manual RS-232C Communication

Page 50

RS-232C COMMUNICATION (continued)

Requesting projector status (Get command)

(1)Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer to the projector.

(2)The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1)Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.

(2)The projector changes the setting based on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1)The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector changes the specified setting to the default value.

(3)The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1)The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector in creases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1)The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2)The projector decreases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned.

When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.

Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.

NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data.

•Provide an interval of at least 40ms between the response code and any other code.

•The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

•Commands are not accepted during warm-up.

6

Downloaded from www.Manualslib.com manuals search engine

Page 49 Page 51
Image 50
Page 49 Page 51
Contents CP-X880W / CP-X885W Contents Projector Features Devices you will be using to the projector Connect your devices to the projectorPart Names Remote Control Press and hold in the elevator Buttons Setting UP the ProjectorAdjusting the Projectors Elevator Feet Turn the elevator screw to fine tuneTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI InputConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Remove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverRemote control in an area free from obstacles Using the Remote ControlOperating the remote control Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Use the lever switch / to adjust the volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundPress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonAs illustrated on the right, a dialog will appear Correcting Keystone DistortionsPress the Keystone button On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenPress the ONE Touch button Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected You can activate the following functions just byDisplaying Child Window P. IN. P Picture in Picture Selecting the Aspect RatioTemporarily Blanking the Screen Use the lever switch To adjust the level Using the Menu FunctionsUse the lever switch / to select Sharpness Then press Press the Menu buttonAvailable Functions Remote Control Operation Operating the PC ScreenDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Menu screen display Press the Menu button Menu selectionPICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuBlank Screen MenuScreen Menu Start UPOption Menu Wireless MenuOption Menu Related Messages Regarding the Indicator Lamps Power Lamp TempVol.2-3 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-7Specification SpecificationsDimension Diagram Unit mmWarranty and AFTER-SERVICE RGB in 1/2 Signal Connector PIN AssignmentSignal Terminal Specification Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals DatavsyncConnection to the Mouse Control USB MouseRS-232C Communication Command dataConsist of header 7 bytes + command data 6 bytes ProtocolRS-232C Communication Command data chart C4 D3Be EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France
Related manuals
Manual 56 pages 38.47 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.
Top Page Image Contents