Hitachi CP-X380W user manual Operations, Power on, Power OFF, Standby, Equipment is used safely

Page 10

OPERATIONS

 

STANDBY/

STANDBY/ON

BLANK

 

 

STANDBY/ON Button

ON Button

 

LASER

 

 

POWER Indicator

 

VIDEO

RGB

 

 

 

AUTO

Zoom Knob

MENU

KEYSTONE

 

MENU SELECT

 

POSITION

RESET

Focus Ring

 

FREEZE

 

MAGNIFY

MUTE

 

 

OFF

Power Switch

VOLUME

Lens Cap

Power ON

1.Check that the power cord is connected correctly.

2.Set the power switch to [ ]. The standby mode is selected, and the POWER indicator is turned to orange.

3.Press the STANDBY/ON button on the control panel or the remote control transmitter. Warm-up begins and the POWER indicator blinks in green.

4.The POWER indicator ceases blinking and turns to green when power is on. Open the slide lens door.

5.Adjust picture size using the zoom knob.

6.Adjust focus using the focus ring .

Power OFF

1.Press the STANDBY/ON button on the control panel or the remote controller. Then,the message "Power off?" will appear on the screen, and the message will disappear by any operation

or no operation for 5 seconds. During this message indication, press the STANDBY/ON button again. The projector lamp is extinguished and lamp cooling begins. The POWER indicator

blinks orange during lamp cooling. Pressing the STANDBY/ON button has no effect while the POWER indicator is blinking.

2.The system assumes the Standby mode when cooling is complete, and the POWER indicator ceases blinking and changes to orange. Check that the indicator is orange and set the power switch to [O].

3.The POWER indicator is extinguished when power is off. Do not forget to close the lens door.

WARNING • Please read this manual, and the separate “SAFETY INSTRUCTIONS” thoroughly before using the equipment. Always ensure that

the equipment is used safely.

NOTE • Except in emergencies, follow the above-mentioned procedure for turning power off. Incorrect procedure will reduce the life of the projector lamp and LCD panel.

To prevent any troble, turn on/off the projector when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before the projector.

When a projector continues projecting the same image, the image may remain as an afterimage. Please do not project the image same for a long time.

ENGLISH

ENGLISH-9

Image 10
Contents CP-X380W Contents Contents of Package FeaturesBefore USE Part Names Before USEComponent Video Remote Control Transmitter Refer to P.9 OperationsLoading the Batteries Fixing the HandleAngle Adjustment InstallationInstallation of the Projector and Screen Installation ReferenceCabling InstallationCabling Example of system setup Power ConnectionPlug & Play Operations Power onPower OFF StandbyBasic Operation OperationsBasic Operation Description Normal menu Single menu Set / Clear Keystone Mode Press the KeystoneAdjust Keystone Press Menu Display Start/Stop Press the Menu buttonSelect Image Aspect Ratio Setup MenuSetup Menu Select Position of ImageInput Menu Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input MenuImage Menu Image Menu DescriptionOptions Menu Set / Crear Whisper Mode PressOptions Menu Select Menu Background Color Select withNo Signal Menu No Signal Menu DescriptionLamp MaintenanceLamp Lamp LifeResetting the Lamp Timer MaintenanceReplacing the Lamp Other Maintenance Air FilterOSD Message TroubleshootingMessage Contents OSD MessagesIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Sub 15-pin Shrink Connector RGB in 1/RGB in 2/RGB OUT Dimension DiagramSignal Connector Pin Assignment Mini Din 4-pin Connector S-VIDEOExample of computer signal TechnicalInitial set signals USB Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse PS/2 MouseADB Mouse Serial MouseRS-232C communication Communications settingCommand data ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 FCC Statement Warning Regulatory NoticesFor the Customers in Canada Pour les utilisateurs au Canada Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France

CP-X380W specifications

The Hitachi CP-X380W is a versatile and high-performance projector designed to meet the needs of educational and business environments. This model stands out for its impressive features, advanced technologies, and user-friendly characteristics, making it an ideal choice for classrooms, conference rooms, and collaborative spaces.

One of the main features of the CP-X380W is its brightness, boasting an impressive 3,800 ANSI lumens. This level of brightness ensures clear and vibrant images, even in well-lit rooms. The high contrast ratio of 20,000:1 enhances image quality by providing deeper blacks and brighter whites, making presentations visually appealing and easy to read.

The projector utilizes Hitachi’s proprietary BrilliantColor technology, which enhances color reproduction by improving the vividness of colors while maintaining image clarity. This is crucial for presentations that rely heavily on visuals, such as graphs, charts, and images, where accurate color representation plays a significant role.

With a native resolution of WXGA (1280 x 800 pixels), the CP-X380W delivers sharp images and text, making it suitable for detailed content. Its 16:10 aspect ratio is particularly beneficial for displaying widescreen content, providing a cinematic experience during video playback.

In terms of connectivity, the Hitachi CP-X380W offers a range of options, including HDMI, VGA, and USB ports. This allows users to connect various devices such as laptops, tablets, and smartphones easily. The inclusion of wireless networking capabilities further enhances flexibility, enabling presentations from mobile devices without the need for physical connections.

The projector is designed with user-friendliness in mind. Its simplified menu navigation and remote control make operation straightforward, even for those who may not be tech-savvy. The built-in 10-watt speaker enhances audio output, reducing the need for external sound systems in smaller settings.

For maintenance, the CP-X380W features a long lamp life of up to 5,000 hours in standard mode, which can be extended to 6,000 hours in eco mode. This longevity significantly reduces the total cost of ownership by minimizing the frequency of lamp replacements.

In summary, the Hitachi CP-X380W is a robust projector that balances brightness, image quality, connectivity, and ease of use. Its advanced technologies and thoughtful design make it an excellent addition to any educational or professional setting, ensuring impactful presentations that leave a lasting impression on audiences.