Hitachi CP-X380W user manual Troubleshooting, OSD Messages, Message Contents

Page 21

TROUBLESHOOTING

OSD Message

The messages as described below may appear on the screen at power ON. Take the appropriate measures when such messages appears.

Table 9. OSD Messages

Message

Contents

 

 

CHANGE THE LAMP

The usage time of lamp will be reaching 2000 hr

AFTER REPLACING LAMP,

shortly.(*2)

RESET THE LAMP TIME.

It is recommended to replace the lamp soon. Prepare a

(*1)

new lamp as a replacement.

 

 

 

The usage time of lamp will be reaching 2000 hr shortly.

CHANGE THE LAMP

It is recommended to replace the lamp within * *

AFTER REPLACING LAMP,

hours.(*2)

RESET THE LAMP TIME.

It might be happened that the lamp is cut off before * * hr

THE POWER WILL TURN OFF

by any chance. Power will be switched OFF

AFTER ** hr.

automatically in * * hours. Replace the lamp as shown in

(*1)

P.17~18 “Lamp”. Always reset the lamp timer after

 

replacing the lamp.

 

 

CHANGE THE LAMP

The usage time of lamp is about to reach. Power will be

AFTER REPLACING LAMP,

switched OFF in a few minutes.(*2)

RESET THE LAMP TIME.

Switch power OFF immediately and replace the lamp as

THE POWER WILL

shown in P.17 ~18 “Lamp”. Always reset the lamp timer

TURN OFF

after replacing the lamp.

AFTER 0 hr.

 

 

 

NO INPUT IS DETECTED

No input signal found.

ON ***

Check signal input connections and signal sources.

 

 

 

The horizontal or vertical frequency of the input signal is

SYNC IS OUT OF RANGE

not within the specified range.

ON ***

Check the specifications of the equipment and the signal

 

source.

 

 

NOTE (*1) This message is cleared automatically after approximately three minutes, and appears every time power is switched ON.

(*2) The unit has a function to turn the power off which will be active when the usage time reaches 2000 hr. However the life of lamp might be much different among lamps, so that it might be happened that a lamp is cut off before the function is active.

ENGLISH-20

Image 21
Contents CP-X380W Contents Features Contents of PackageBefore USE Before USE Part NamesComponent Video Refer to P.9 Operations Remote Control TransmitterFixing the Handle Loading the BatteriesInstallation of the Projector and Screen InstallationAngle Adjustment Installation ReferenceInstallation CablingCabling Power Connection Example of system setupPlug & Play Power OFF Power onOperations StandbyOperations Basic OperationBasic Operation Description Adjust Keystone Press Set / Clear Keystone Mode Press the KeystoneNormal menu Single menu Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuSelect Image Aspect Ratio Select Position of ImageAutomatic Adjustment at Video Input Select the Execute with Automatic Adjustment at RGB Input Select the Execute withInput Menu Input MenuImage Menu Description Image MenuOptions Menu Set / Crear Whisper Mode PressOptions Menu Select Menu Background Color Select withNo Signal Menu Description No Signal MenuLamp MaintenanceLamp Lamp LifeMaintenance Resetting the Lamp TimerReplacing the Lamp Air Filter Other MaintenanceMessage Contents TroubleshootingOSD Message OSD MessagesIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Signal Connector Pin Assignment Dimension DiagramSub 15-pin Shrink Connector RGB in 1/RGB in 2/RGB OUT Mini Din 4-pin Connector S-VIDEOTechnical Example of computer signalInitial set signals PS/2, ADB or Serial Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseSerial Mouse ADB MouseCommand data Communications settingRS-232C communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 Regulatory Notices FCC Statement WarningFor the Customers in Canada Pour les utilisateurs au Canada Hitachi Sales Europe GmbH Hitachi Europe GmbHHitachi Business Systems Nordic Hitachi France

CP-X380W specifications

The Hitachi CP-X380W is a versatile and high-performance projector designed to meet the needs of educational and business environments. This model stands out for its impressive features, advanced technologies, and user-friendly characteristics, making it an ideal choice for classrooms, conference rooms, and collaborative spaces.

One of the main features of the CP-X380W is its brightness, boasting an impressive 3,800 ANSI lumens. This level of brightness ensures clear and vibrant images, even in well-lit rooms. The high contrast ratio of 20,000:1 enhances image quality by providing deeper blacks and brighter whites, making presentations visually appealing and easy to read.

The projector utilizes Hitachi’s proprietary BrilliantColor technology, which enhances color reproduction by improving the vividness of colors while maintaining image clarity. This is crucial for presentations that rely heavily on visuals, such as graphs, charts, and images, where accurate color representation plays a significant role.

With a native resolution of WXGA (1280 x 800 pixels), the CP-X380W delivers sharp images and text, making it suitable for detailed content. Its 16:10 aspect ratio is particularly beneficial for displaying widescreen content, providing a cinematic experience during video playback.

In terms of connectivity, the Hitachi CP-X380W offers a range of options, including HDMI, VGA, and USB ports. This allows users to connect various devices such as laptops, tablets, and smartphones easily. The inclusion of wireless networking capabilities further enhances flexibility, enabling presentations from mobile devices without the need for physical connections.

The projector is designed with user-friendliness in mind. Its simplified menu navigation and remote control make operation straightforward, even for those who may not be tech-savvy. The built-in 10-watt speaker enhances audio output, reducing the need for external sound systems in smaller settings.

For maintenance, the CP-X380W features a long lamp life of up to 5,000 hours in standard mode, which can be extended to 6,000 hours in eco mode. This longevity significantly reduces the total cost of ownership by minimizing the frequency of lamp replacements.

In summary, the Hitachi CP-X380W is a robust projector that balances brightness, image quality, connectivity, and ease of use. Its advanced technologies and thoughtful design make it an excellent addition to any educational or professional setting, ensuring impactful presentations that leave a lasting impression on audiences.