Hitachi CP-X380W user manual Requesting projector status Get command

Page 32

TECHNICAL (continued)

Requesting projector status (Get command)

(1)Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer to the projector.

(2)The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1)Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.

(2)The projector changes the setting based on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1)The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector changes the specified setting to the default value.

(3)The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1)The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector in creases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1)The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2)The projector decreases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned.

When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.

Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.

NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data.

•Provide an interval of at least 40ms between the response code and any other code.

•The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

•Commands are not accepted during warm-up.

TECHNICAL

TECHNICAL - 7

Page 31 Page 33
Image 32
Page 31 Page 33
Contents CP-X380W Contents Before USE FeaturesContents of Package Component Video Before USEPart Names Remote Control Transmitter Refer to P.9 OperationsLoading the Batteries Fixing the HandleInstallation Installation of the Projector and ScreenAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of system setup Power on Power OFFOperations StandbyBasic Operation Description OperationsBasic Operation Set / Clear Keystone Mode Press the Keystone Adjust Keystone PressNormal menu Single menu Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuSelect Image Aspect Ratio Select Position of ImageAutomatic Adjustment at RGB Input Select the Execute with Automatic Adjustment at Video Input Select the Execute withInput Menu Input MenuImage Menu Image Menu DescriptionSet / Crear Whisper Mode Press Options MenuOptions Menu Select Menu Background Color Select withNo Signal Menu No Signal Menu DescriptionMaintenance LampLamp Lamp LifeReplacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterTroubleshooting Message ContentsOSD Message OSD MessagesTroubleshooting Indicators MessageIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Dimension Diagram Signal Connector Pin AssignmentSub 15-pin Shrink Connector RGB in 1/RGB in 2/RGB OUT Mini Din 4-pin Connector S-VIDEOExample of computer signal TechnicalInitial set signals Connection to the Mouse Control PS/2, ADB or Serial MouseUSB Mouse PS/2 MouseADB Mouse Serial MouseCommunications setting Command dataRS-232C communication ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi France

CP-X380W specifications

The Hitachi CP-X380W is a versatile and high-performance projector designed to meet the needs of educational and business environments. This model stands out for its impressive features, advanced technologies, and user-friendly characteristics, making it an ideal choice for classrooms, conference rooms, and collaborative spaces.

One of the main features of the CP-X380W is its brightness, boasting an impressive 3,800 ANSI lumens. This level of brightness ensures clear and vibrant images, even in well-lit rooms. The high contrast ratio of 20,000:1 enhances image quality by providing deeper blacks and brighter whites, making presentations visually appealing and easy to read.

The projector utilizes Hitachi’s proprietary BrilliantColor technology, which enhances color reproduction by improving the vividness of colors while maintaining image clarity. This is crucial for presentations that rely heavily on visuals, such as graphs, charts, and images, where accurate color representation plays a significant role.

With a native resolution of WXGA (1280 x 800 pixels), the CP-X380W delivers sharp images and text, making it suitable for detailed content. Its 16:10 aspect ratio is particularly beneficial for displaying widescreen content, providing a cinematic experience during video playback.

In terms of connectivity, the Hitachi CP-X380W offers a range of options, including HDMI, VGA, and USB ports. This allows users to connect various devices such as laptops, tablets, and smartphones easily. The inclusion of wireless networking capabilities further enhances flexibility, enabling presentations from mobile devices without the need for physical connections.

The projector is designed with user-friendliness in mind. Its simplified menu navigation and remote control make operation straightforward, even for those who may not be tech-savvy. The built-in 10-watt speaker enhances audio output, reducing the need for external sound systems in smaller settings.

For maintenance, the CP-X380W features a long lamp life of up to 5,000 hours in standard mode, which can be extended to 6,000 hours in eco mode. This longevity significantly reduces the total cost of ownership by minimizing the frequency of lamp replacements.

In summary, the Hitachi CP-X380W is a robust projector that balances brightness, image quality, connectivity, and ease of use. Its advanced technologies and thoughtful design make it an excellent addition to any educational or professional setting, ensuring impactful presentations that leave a lasting impression on audiences.
Top Page Image Contents