Hitachi CP-X385W user manual Example of Computer Signal

EXAMPLE OF COMPUTER SIGNAL

Resolution		fH (kHz)	fV (Hz)	Rating	Signal mode	Display mode
H ⋅ V
720	⋅ 400	37.9	85.0	VESA	TEXT	Zoom in
640	⋅ 480	31.5	59.9	VESA	VGA (60Hz)	Zoom in
640	⋅ 480	35.0	66.7		Mac13"mode	Zoom in
640	⋅ 480	37.9	72.8	VESA	VGA (72Hz)	Zoom in
640	⋅ 480	37.5	75.0	VESA	VGA (75Hz)	Zoom in
640	⋅ 480	43.3	85.0	VESA	VGA (85Hz)	Zoom in
800	⋅ 600	35.2	56.3	VESA	SVGA (56Hz)	Zoom in
800	⋅ 600	37.9	60.3	VESA	SVGA (60Hz)	Zoom in
800	⋅ 600	48.1	72.2	VESA	SVGA (72Hz)	Zoom in
800	⋅ 600	46.9	75.0	VESA	SVGA (75Hz)	Zoom in
800	⋅ 600	53.7	85.1	VESA	SVGA (85Hz)	Zoom in
832	⋅ 624	49.7	74.5		Mac16"mode	Zoom in
1024 ⋅ 768		48.4	60.0	VESA	XGA (60Hz)
1024 ⋅ 768		56.5	70.1	VESA	XGA (70Hz)
1024 ⋅ 768		60.0	75.0	VESA	XGA (75Hz)
1024 ⋅ 768		68.7	85.0	VESA	XGA (85Hz)
1152 ⋅ 864		67.5	75.0	VESA	SXGA (75Hz)	Zoom out
1280 ⋅ 960		60.0	60.0	VESA	SXGA (60Hz)	Zoom out
1280	⋅ 1024	64.0	60.0	VESA	SXGA (60Hz)	Zoom out
1280	⋅ 1024	80.0	75.0	VESA	SXGA (75Hz)	Zoom out
1280	⋅ 1024	91.2	85.0	VESA	SXGA (85Hz)	Zoom out
1600	⋅ 1200	75.0	60.0	VESA	UXGA (60Hz)	Zoom out

NOTE • Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

•Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.

•Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of display pixels above.

•This projector will display up to UXGA (1600X1200) resolution signals but the image will be rescaled to the native resolution of the projector. Best display performance is achieved when the signal input resolution is the same as the native resolution of the projector.

•The image may not be displayed correctly when the input sync. signal is “Composite Sync.” or “Sync. on G”.

2