SETTING UP THE PROJECTOR
CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.
•If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
Angle Adjustment
Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable within 0˚ to 9˚ approximately.
Lift up the front side of the
1 projector, and pressing the foot adjuster button, adjust the projection angle.
Press the foot adjuster button
2 Release the button to lock at the desired angle.
Turn the rear foot adjuster to adjust
3 the
foot adjuster screws. This could damage the adjusters or cause the lock to fail.
Rear Foot Adjuster
6