NEC MT1065/MT1060 Installation and Connections, Setting Up the Screen and the Projector

INSTALLATION AND CONNECTIONS

This section describes how to set up your projector and how to connect video and audio sources.

1

2

Your projector is simple to set up and use. But before you get started, you must first:

zSet up a screen and the projector.

xConnect your computer or video equip- ment to the projector. See page E-14 – 17.

cConnect the supplied power cable. See page E-17.

NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.

To the wall outlet.

3

Setting Up the Screen and the Projector

Selecting a Location

The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" (0.64 m) measured diagonally when the projector is roughly 39.4 inches (1.0 m) from the wall or screen. The largest the image can be is 500" (12.7 m) when the projector is about 614.2 inches (15.6 m) from the wall or screen. Use the drawing below as a guide.

Screen

609.

size

406.

6(W)X457. (Unit:

7(W)X365.

2(H)/240(W)X180(H)

487.

cm/inch)

8(H)/192(W)X144(H)

365.

4(W)X304.

8(W)X274.

8(H)/160(W)X120(H)

300"

304.

3(H)/144(W)X108(H)

240"

8(W)X228.

200"

6(H)/120(W)X90(H)

243.

180"

8(W)X182.

2(W)X152.

9(H)/96(W)X72(H)

203.

6(W)X121.4(H)/80(W)X60(H)

150"

162.

9(H)/64(W)X48(H)

9(W)X91.

120"

121.

4(H)/48(W)X36(H)

3(W)X61.

100"

TELE:

81.

0(H)/32(W)X24(H)

61.

80"

0(W)X45.

50.

7(H)/24(W)X18(H)

60"

8(W)X38.

1(H)/20(W)X15(H)

40"

Lens

center

25"

.0

1

.1

1

.4

.1

1

.8

2

.5

2

.3

3

4

Screen Size

.3	.4	.1	.5
	6			.6
5		7	8
				10

WARNING: To avoid premature lamp failure, do not tilt the front of the projector up or down by more than 15° from level.

m) (Unit: Distance

E-12