NEC MT1065/MT1060 Cleaning or Replacing the Filter, Cleaning the Cabinet and the Lens

Page 54

Cleaning

Cleaning or Replacing the Filter

The air-filter sponge keeps the inside of the projector from dust or dirt and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may over- heat.

CAUTION

•Turn off the power and unplug the projector before replacing the filter.

•Only clean the outside of the filter cover with a vacuum cleaner.

•Do not attempt to operate the projector without the filter cover.

To clean the air-filter:

Vacuum the filter-through the filter cover.

3. Reinstall the new filter cover.

Catch

NOTE: Do not wash the filter with soap and water. Soap and water will damage the filter membrane. Before replacing the filter, remove dust and dirt from the projector cabinet. Keep out dust and during filter replacement.

NOTE: When you replace the lamp, it is also wise to replace the filter. The filter comes in the same package with your replacement lamp.

Cleaning the Cabinet and the Lens

To reset the filter usage time, from the menu, select [Projector Options]

→[Setup] → [Page 4] → [Clear Filter Usage Meter] → [OK]. See also page E-45 for resetting the filter usage time.

To replace the filter (sponge):

1.Remove the filter cover by pushing up on the catch of the cover until you feel it detach.

2. Gently peel off the filter (sponge) and replace it with the new one.

1.Turn off the projector before cleaning.

2.Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner.

3.Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.

E-54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents MT1065/MT1060 Safety Cautions Guarantee policy Fire and Shock PrecautionsLamp Replacement Whats in the Box?Table of Contents Features youll enjoy IntroductionIntroduction to the Projector Part Names of the Projector Attaching the lens capCarrying the Projector Top Features SelectTerminal Panel Features Part Names of the Remote Control On the screen using the SelectRGB Viewer Operating Range for Wireless Remote Control Battery InstallationRemote Control Precautions Using the Remote Control in Wired OperationInstallation and Connections Setting Up the Screen and the ProjectorSelecting a Location Throw Distance and Screen Size Distance ChartDo not attempt to install the projector yourself Reflecting the ImageConnecting to RGB 2 in connectors When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting Your PC with a DVI ConnectorConnecting an External Monitor To connect Scart output RGBConnecting Your DVD Player DVD playerConnecting Your VCR or Laser Disc Player Connecting the Supplied Power CableProjecting AN Image Basic Operation Turning on the ProjectorAdjust the Tilt Foot Adjusting the Picture Size and PositionUsing the Remote Control Selecting a SourceFocus When using the USB connected to the projectorUsing Auto Focus Use the Focus Button +/- to obtain the best focusWhen using the remote control or cabinet buttons Confirmation screen is displayedAdjusting the Image Using Auto Adjust Turning Up or Down VolumeUsing the Laser Pointer Optimizing RGB Picture AutomaticallySetting the function switch Turning off the ProjectorTo turn off the projector Convenient Features Using the Remote Mouse FunctionUsing the Pointer Freezing a PictureGetting the On-line Help Using the USB Mouse Using the USB HUB Function Operate the Menus using the USB mouseChanging Background Logo Making Freehand Drawings on a Projected Image ChalkBoardUsing the Viewer Making the Most out of the Viewer FunctionWhen the tool bar is not displayed Operating the Viewer Function from the Projector playbackProjecting slides Viewer Viewing Digital Images Auto Play ModeSwitching to Slides Directly from Other Input Modes PreparationsUsing the PC Card Files Fucntion PC Card Files Deleting Captured ImagesTo delete captured images Default Custom Menu items are Using ON-SCREEN MenuUsing the Menus Basic Menu OperationMenu tree Advanced MenuOperation Mode Select Default Source SelectCommunication Speed WEP Menu Elements Entering Alphanumeric Characters by Using the Menu Menu Descriptions & FunctionsSource Select Sound Entry Edit CommandPicture not available for Viewer and LAN Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup User can adjust the image display functions Hori Resolution manuallySelecting Lamp Mode and Lamp Type Lamp Setting Selecting Aspect Ratio and Position for Screen Screen Selecting Auto FunctionsSetting LAN Mode Network Type required for wireless onlyUses 64-bit datalength for secure transmission WEP for Wireless onlyNications may be monitored by someone Pared to use of 64bit datalength encryptionEntry Setting a PasswordStatus DeleteTo enable Security, use the Select SecurityTo delete PC card data you registered Returning to Factory Default ToolsHelp Maintenance Replacing the LampTo replace the lamp Cleaning the Cabinet and the Lens CleaningCleaning or Replacing the Filter Vacuum the filter-through the filter coverStatus Indicator TroubleshootingPower Indicator Lamp IndicatorContents of PC Card are damaged Common Problems & Solutions Check These ItemsWhen using the Viewer function Image isn’t square toSpecifications Model Number MT1065/MT1060 OpticalMini D-Sub 15 Pin Connector Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List PC Control Codes and Cable Connection PC Control Connector D-SUB 9PUsing Software Keyboard Cable ConnectionPreparation Before Use Operation Using an Http BrowserOverview Handling of the Address for Operation via a BrowserTerm of warranty TravelCare a service for international travelersServices offered with TravelCare TravelCare GuideAsia and Middle East Abba Electronics L.L.CApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1065/MT1060 specifications

The NEC MT1065 and MT1060 are advanced portable projectors that exemplify high-quality performance for various professional settings. These models, part of NEC’s reputation for reliable display solutions, cater to a wide range of applications, from corporate presentations to educational environments. Both projectors share several key features and technologies that make them standout choices in the market.

One of the main characteristics of the MT1065 and MT1060 is their high brightness level. The MT1065 delivers an impressive 5,500 ANSI lumens, while the MT1060 offers a slightly lower luminous output at 4,500 ANSI lumens. This high brightness ensures that presentations remain clear and visible, even in well-lit rooms. The projectors feature a high contrast ratio that enhances image quality by producing deeper blacks and brilliant whites.

In terms of imaging technology, both models utilize DLP (Digital Light Processing) technology, which is renowned for its sharpness and color accuracy. DLP technology contributes to vibrant images with smooth transitions and little to no motion blur, making these projectors suitable for displaying video content, graphics, or text-heavy presentations.

Portability is another vital aspect of the NEC MT1065 and MT1060. Weighing just over 6.5 lbs each, these projectors are designed for ease of transport, making them ideal for business professionals who frequently move between different locations. Their compact size does not compromise their durability, as they are constructed with robust materials suitable for various environments.

Both models come equipped with multiple connectivity options, including HDMI, VGA, and USB ports. This versatility allows users to connect a wide range of devices, from laptops and tablets to USB thumb drives, providing flexibility in presentations. Furthermore, the projectors also support a variety of display resolutions, up to Full HD 1080p, ensuring compatibility with modern multimedia content.

User-friendliness is emphasized through features such as automatic keystone correction and an intuitive user interface, simplifying setup and operation. The projectors also incorporate energy-efficient technologies, reducing power consumption and contributing to lower operational costs.

In summary, the NEC MT1065 and MT1060 projectors are equipped with high brightness levels, advanced DLP imaging technology, and user-friendly features, making them excellent choices for professionals seeking reliable, high-performance portable projectors. With their solid build quality and versatility, they effectively meet the demands of dynamic presentation environments.
Top Page Image Contents