NEC MT1065/MT1060 Selecting Aspect Ratio and Position for Screen Screen, Selecting Auto Functions

Page 47

Selecting Aspect Ratio and Position for Screen [Screen]

Screen Type:

Select either 4:3 Screen or 16:9 Screen for the screen to be used. See also "Aspect Ratio" on page E-38.

NOTE: When "Resolution" is set to "Native", this selection is inactive.

Position:

This feature adjusts the vertical position of the image when viewing video with an aspect ratio selected.

When some aspect ratios are selected in Image Options, the image is displayed with black borders on the top and bottom.

You can adjust the vertical position between top and bottom.

NOTE: This option is not available when "4:3" is selected in Screen Type and "Letterbox" is selected in Aspect Ratio.

NOTE: During 3D Reform adjustment, "Screen Type" and "Screen Position" may not be available. To make available, first reset the 3D Reform data and then do settings again. Secondly repeat the 3D Reform adjustment. Changing "Screen Type" and "Screen Position" can limit 3D Reform in its adjustable range.

Selecting Auto Functions

Focus:

When Auto Focus is enabled in the Auto Functions menu, Auto Fo- cus can be executed by pressing and holding the AUTO ADJUST or AUTO ADJ button for a minimum of 2 seconds.

Wall Color Correction:

When Wall Color Correction is enabled in the Auto Functions menu, Wall Color Correction can be executed by pressing and holding the AUTO ADJUST or AUTO ADJ button for a minimum of 2 seconds. Correction settings will be saved on "User 4 (AutoAdjustButton)".

NOTE:

1.If neither Focus or Wall Color Correction are enabled in the Auto Functions menu when you press and hold the AUTO ADJUST or AUTO ADJ button for a minimum of 2 seconds, the Auto Adjust function (Position/Clock/ Phase) will be performed instead of Auto Focus and Auto Wall Color Cor- rection.

2.Due to specifications of the image sensor on the projector, Auto Functions are effective to image sizes between 40" and 150"(diagonal). Also in some cases Auto Functions may not work correctly depending on projection conditions such as textured material of the screen or ambient light.

E-47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents MT1065/MT1060 Safety Cautions Whats in the Box? Fire and Shock PrecautionsLamp Replacement Guarantee policyTable of Contents Introduction to the Projector Features youll enjoyIntroduction Carrying the Projector Part Names of the ProjectorAttaching the lens cap Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlRGB Viewer Using the Remote Control in Wired Operation Battery InstallationRemote Control Precautions Operating Range for Wireless Remote ControlSelecting a Location Installation and ConnectionsSetting Up the Screen and the Projector Reflecting the Image Distance ChartDo not attempt to install the projector yourself Throw Distance and Screen SizeConnecting Your PC with a DVI Connector When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting to RGB 2 in connectorsTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationSelecting a Source Adjusting the Picture Size and PositionUsing the Remote Control Adjust the Tilt FootUse the Focus Button +/- to obtain the best focus When using the USB connected to the projectorUsing Auto Focus FocusConfirmation screen is displayed When using the remote control or cabinet buttonsOptimizing RGB Picture Automatically Turning Up or Down VolumeUsing the Laser Pointer Adjusting the Image Using Auto AdjustTo turn off the projector Setting the function switchTurning off the Projector Using the Remote Mouse Function Convenient FeaturesGetting the On-line Help Using the PointerFreezing a Picture Operate the Menus using the USB mouse Using the USB Mouse Using the USB HUB FunctionMaking Freehand Drawings on a Projected Image ChalkBoard Changing Background LogoMaking the Most out of the Viewer Function Using the ViewerProjecting slides Viewer When the tool bar is not displayedOperating the Viewer Function from the Projector playback Preparations Auto Play ModeSwitching to Slides Directly from Other Input Modes Viewing Digital ImagesTo delete captured images Using the PC Card Files Fucntion PC Card FilesDeleting Captured Images Basic Menu Operation Using ON-SCREEN MenuUsing the Menus Default Custom Menu items areAdvanced Menu Menu treeCommunication Speed Operation Mode SelectDefault Source Select WEP Menu Elements Source Select Entering Alphanumeric Characters by Using the MenuMenu Descriptions & Functions Image Options Entry Edit CommandPicture not available for Viewer and LAN SoundPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModePared to use of 64bit datalength encryption WEP for Wireless onlyNications may be monitored by someone Uses 64-bit datalength for secure transmissionDelete Setting a PasswordStatus EntryTo delete PC card data you registered To enable Security, use the SelectSecurity Help Returning to Factory DefaultTools To replace the lamp MaintenanceReplacing the Lamp Vacuum the filter-through the filter cover CleaningCleaning or Replacing the Filter Cleaning the Cabinet and the LensLamp Indicator TroubleshootingPower Indicator Status IndicatorImage isn’t square to Common Problems & Solutions Check These ItemsWhen using the Viewer function Contents of PC Card are damagedModel Number MT1065/MT1060 Optical SpecificationsPin No RGB Signal Analog YCbCr Signal Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Mini D-Sub 15 Pin ConnectorCompatible Input Signal List Cable Connection PC Control Connector D-SUB 9PUsing Software Keyboard PC Control Codes and Cable ConnectionHandling of the Address for Operation via a Browser Operation Using an Http BrowserOverview Preparation Before UseTravelCare Guide TravelCare a service for international travelersServices offered with TravelCare Term of warrantyAbba Electronics L.L.C Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1065/MT1060 specifications

The NEC MT1065 and MT1060 are advanced portable projectors that exemplify high-quality performance for various professional settings. These models, part of NEC’s reputation for reliable display solutions, cater to a wide range of applications, from corporate presentations to educational environments. Both projectors share several key features and technologies that make them standout choices in the market.

One of the main characteristics of the MT1065 and MT1060 is their high brightness level. The MT1065 delivers an impressive 5,500 ANSI lumens, while the MT1060 offers a slightly lower luminous output at 4,500 ANSI lumens. This high brightness ensures that presentations remain clear and visible, even in well-lit rooms. The projectors feature a high contrast ratio that enhances image quality by producing deeper blacks and brilliant whites.

In terms of imaging technology, both models utilize DLP (Digital Light Processing) technology, which is renowned for its sharpness and color accuracy. DLP technology contributes to vibrant images with smooth transitions and little to no motion blur, making these projectors suitable for displaying video content, graphics, or text-heavy presentations.

Portability is another vital aspect of the NEC MT1065 and MT1060. Weighing just over 6.5 lbs each, these projectors are designed for ease of transport, making them ideal for business professionals who frequently move between different locations. Their compact size does not compromise their durability, as they are constructed with robust materials suitable for various environments.

Both models come equipped with multiple connectivity options, including HDMI, VGA, and USB ports. This versatility allows users to connect a wide range of devices, from laptops and tablets to USB thumb drives, providing flexibility in presentations. Furthermore, the projectors also support a variety of display resolutions, up to Full HD 1080p, ensuring compatibility with modern multimedia content.

User-friendliness is emphasized through features such as automatic keystone correction and an intuitive user interface, simplifying setup and operation. The projectors also incorporate energy-efficient technologies, reducing power consumption and contributing to lower operational costs.

In summary, the NEC MT1065 and MT1060 projectors are equipped with high brightness levels, advanced DLP imaging technology, and user-friendly features, making them excellent choices for professionals seeking reliable, high-performance portable projectors. With their solid build quality and versatility, they effectively meet the demands of dynamic presentation environments.
Top Page Image Contents