NEC MT 1020G /820G user manual Installation, Setting Up Your MultiSync MT1020G/820G LCD Projector

2 I N S T A L L A T I O N

This section describes how to set up your MultiSync MT1020G/820G LCD projector and how to connect video and audio sources.

Setting Up Your MultiSync MT1020G/820G LCD Projector

Your MultiSync MT1020G/820G LCD Projector is simple to set up and use. But before you get started, you must first:

1.Determine the image size

2.Set up a screen or select a non-glossy white wall onto which you can project your image.

Carrying The LCD Projector Always carry your LCD projector by the handle. Ensure that the power cord and any other cables connecting to video sources are discon- nected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.

Selecting A Location The further your LCD projector is from the screen or wall, the larger the image. The mini- mum size the image can be is approximately 20" (0.5 m) measured diagonally when the projector is roughly 1.0 m (3 feet) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 12.2 m (40.03 feet) from the wall or screen.

Using the Supplied Lift Kit

When you need to set the projector at 10.5° projection angle or more, assemble and use the lift kit.

1. Assemble the kit.

•Align the foot and mate with corresponding grooves in the bar.

2.Place the projector on the lift kit.

Carrying handle

Push to release the handle.

Pull out

Push to retract

Projection Distance and Image Size

	350									300”
(inch)	300
	250
Size
	200									235”
Image
					WIDE
	150
Diagonal	100
						TELE
	50
		27”
	0	20”
			6.56	13.12	19.69		26.25	32.81	40.03		ft.
	0.0
			(2.0)	(4.0)	(6.0)		(8.0)	(10.0)	(12.2) (m)

Projection Distance

Projection distance

Width

Height

Screen size

(diagonal)

E – 13