NEC VT58, VT57 Selecting a Source, Detecting the Signal Automatically, Using the Remote Control

3. Projecting an Image (Basic Operation)

Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or VCR connected to the projector.

Selecting from Source List

Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the SOURCE button is pressed, the input source will change as follows: “Computer 1”, “Computer 2” (VT580/ VT480 only), ”Video” (VCR or laser disc player), “S-Video”, To display the selected source, allow 1 second to elapse.

	MENU
	SELECT
LAMP	EN		IT
	TER
		X
		E
STATUS
POWER
	ON/STAND BY SOURCE	AUTO ADJ.

Detecting the Signal Automatically

Press and hold the SOURCE button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the SOURCE button for a minimum of 2 seconds, the input source will change as follows:

VT580/VT480

Computer1 → Computer2 → Video → S-Video → Computer1 → ...

VT58/VT57/VT48

Computer → Video → S-Video → Computer → ...

TIP:

If no input signal is present, the input will be skipped. When the input source you wish to project is displayed, release the SOURCE button.

Using the Remote Control

Press any one of the COMPUTER 1/2, VIDEO, S-VIDEO buttons.

NOTE: the COMPUTER 2 button is not available on the VT58, VT57 and VT48.

	MENU
	SELECT
	E	IT
LAMP	NTER
		E
		X
STATUS
POWER
	ON/STAND BY SOURCE	AUTO ADJ.

L-CLICK		R-CLICK
	MOUSE
VIDEO	COMPUTER AUTO ADJ.
	1
S-VIDEO		LAMP MODE
	2
VOLUME	ASPECT	HELP
	PICTURE	FREEZE

21