NEC VT58, VT57, VT480 manual Compatible Input Signal List

Page 69

7. Appendix

Compatible Input Signal List

Horizontal: 15KHz to 100KHz (RGB: 24KHz or over)

Vertical: 50Hz to 120Hz

			Signal	Resolution			Frequency H.	Refresh Rate
				( Dots )			( kHz )	( Hz )
			NTSC		–		15.73	59.94
			PAL		–		15.63	50.00

			PAL60		–		15.73	60.00
			SECAM		–		15.63	50.00
			VESA	640	×	480	31.47	59.94

			IBM	640	×	480	31.48	59.95
			MAC	640	×	480	35.00	66.67
			VESA	640	×	480	37.86	72.81

			VESA	640	×	480	37.50	75.00
			IBM	640	×	480	39.38	75.00
			VESA	640	×	480	43.27	85.01

			IBM	720	×	350	31.47	70.08
			IBM	720	×	350	39.44	87.85
			IBM	720	×	400	39.44	87.85

			VESA	800	×	600	35.16	56.25
			VESA	800	×	600	37.88	60.32
			VESA	800	×	600	48.08	72.19

			VESA	800	×	600	46.88	75.00
			VESA	800	×	600	53.67	85.06
	@		MAC	832	×	624	49.72	74.55

	@		VESA	1024	×	768	48.36	60.00
	@		VESA	1024	×	768	56.48	70.07
	@		MAC	1024	×	768	60.24	74.93

	@		VESA	1024	×	768	60.02	75.03
	@		VESA	1024	×	768	68.68	85.00
	@	#	VESA	1152	×	864	67.50	75.00

	@	#	MAC	1152	×	870	68.68	75.06
	@	#	VESA	1280	×	960	60.00	60.00
	@	#		1280	×	960	75.00	75.00

	@	#		1280	×	960	85.94	85.00
	@	#	VESA	1280	×	1024	63.98	60.02
	@	#	MAC	1280	×	1024	69.87	65.18

	@	#	VESA	1280	×	1024	79.98	75.02
	@	#	VESA	1280	×	1024	91.15	85.02
	@	#	VESA	1600	×	1200	75.00	60.00

	@	#	VESA	1600	×	1200	81.25	65.00
	@	#	VESA	1600	×	1200	87.50	70.00
	@	#	VESA	1600	×	1200	93.75	75.00

			SDTV(576i)(625i)		–		15.63	50.00	Interlace
			SDTV(576p)(625p)		–		31.25	50.00	Progressive
	@	#	HDTV (1080i)(1125i)	1920	×	1080	33.75	60.00	Interlace

	@	#	HDTV (1080i)(1125i)	1920	×	1080	28.13	50.00	Interlace
	@	#	HDTV (720p)(750p)	1280	×	720	45.00	60.00	Progressive
			SDTV (480p)(525p)		–		31.47	59.94	Progressive

			DVD YCbCr		–		15.73	59.94	Interlaced
			DVD YCbCr		–		15.63	50.00	Interlaced

#: Images in above flagged with # are compressed with Advanced AccuBlend on VT580/VT58/VT57. @ : Images in above flagged with @ are compressed with Advanced AccuBlend on VT480/VT48.

NOTE: Some composite sync signals may not be displayed correctly.

Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh rate or resolution on your PC. Refer to Display Properties help section of your PC for procedures.

UXGA (1600×1200) is supported for separate sync signal only.

61

Image 69

Contents VT580/VT480/VT58/VT57/VT48 Page Precautions Safety CautionsDOC Compliance Notice for Canada only Disposing of your used productInstallation Important SafeguardsImportant Information RF Interference for USA onlyIii Fire and Shock PrecautionsRemote Control Precautions Lamp ReplacementLamp Characteristic Table of Contents Convenient Features Table of ContentsUsing On-Screen Menu MaintenanceFor VT580 and VT480 only Whats in the Box?Introduction to the Projector Features youll enjoyIntroduction Congratulations on Your Purchase of the ProjectorPart Names of the Projector Front/TopRear Attaching the supplied carrying handle Introduction BottomTop Features VT58/VT57/VT48 Introduction Terminal Panel FeaturesPower Part Names of the Remote ControlOperating Range for Wireless Remote Control Introduction Battery InstallationSelecting a Location VT580/VT480/VT58/VT57 Setting Up the Screen and the Projector240 Installation and Connections Selecting a Location VT48Distance Chart Installation and Connections Throw Distance and Screen SizeVT580/VT480/VT58/VT57 VT48Reflecting the Image Installation and ConnectionsConnecting Your PC or Macintosh Computer Making ConnectionsEnabling the computer’s external display Installation and Connections To connect Scart output RGB Daisy chain connection is not possible Installation and Connections Connecting an External MonitorAudio cable not supplied Video cable not supplied Lamp Turning on the Projector Projecting an Image Basic OperationPress the Enter button to execute the selection Projecting an Image Basic OperationDetecting the Signal Automatically Using the Remote ControlSelecting a Source Adjusting the Picture Size and Position Adjust the Tilt FootLift the front edge of the projector Focus Projecting an Image Basic Operation ZoomAdjusting with the Remote Control Adjusting with buttons on the cabinetCorrecting Keystone Distortion Correcting Keystone DistortionPress the Select or button to select On Turning Up or Down Volume Adjusting the Image Using Auto AdjustOptimizing RGB Picture Automatically To turn off the projector Turning off the ProjectorAfter Use Turning off the Image and Sound Freezing a PictureEnlarging a Picture Convenient Features Changing Lamp ModeTo enable the Security function Preventing the Unauthorized Use of the ProjectorSelect Yes and press the Enter button Type in your keyword and press the Enter button To disable the Security functionConnecting the remote mouse receiver to your computer Using Remote Mouse Receiver VT580/VT480 onlyWhen operating a computer via the remote mouse receiver When connecting using the USB terminalSelect About Drag ModeUsing the Menus Using On-Screen MenuFor Adjusting items Slide bar Using On-Screen MenuFor Selecting items Solid triangle For Selecting items Radio buttonMenu Elements Indicates the Control Panel Lock is enabledPicture List of Menu ItemsReset Detail Settings Selecting Reference Setting Reference PresetSelecting Gamma Correction Mode Gamma Correction Adjusting Color Temperature Color TemperatureAdjusting Brightness, Contrast, Sharpness, Color and Hue Using On-Screen Menu Adjusting White Balance White BalanceReset Menu Descriptions & Functions Image OptionsCopyright Selecting Noise Reduction Level Noise ReductionMenu Descriptions & Functions Setup Disabling the Cabinet Buttons Control Panel Lock Selecting Communication Speed Communication SpeedEnabling Power Management Power Management Setting Auto Adjust Auto AdjustSelecting Menu Color Menu Color Select Selecting Menu Display Time Menu Display TimeSelecting Signal Format Signal Select Using On-Screen Menu Enabling Fan Speed Mode Fan ModeEnabling Key Sound and Error Sound Beep Enabling the deinterlace DeinterlaceMenu Descriptions & Functions Information Usage TimeSource Using On-Screen Menu Version Menu Descriptions & Functions ResetReturning to Factory Default Reset Clearing Lamp Hour Meter Clear Lamp HoursCleaning or Replacing the Filters To clean the air-filterTo replace the filter sponge Cleaning the Cabinet and the Lens MaintenanceReinstall the new filter cover Clear the filter hours used To replace the lamp Replacing the LampRemove the lamp housing Install a new lamp housingReattach the lamp cover Maintenance Indicator Messages Power Indicator TroubleshootingAppendix Problem Check These ItemsPage Specifications OpticalElectrical VT58/VT57/VT48 2.4 1.0A VT580/VT480 3.1 1.3AMechanical VT580/VT480/VT58/VT48120.8 Cabinet DimensionsMini D-Sub 15 Pin Connector Pin Assignments of D-Sub Computer Input ConnectorCompatible Input Signal List PC Control Codes VT580/VT480 PC Control Codes and Cable ConnectionPC Control Codes VT58/VT57/VT48 Cable ConnectionAppendix PC Control Connector DIN-8P Power Troubleshooting Check ListComputer TravelCare Guide TravelCare a service for international travelersAsia and Middle East Application Sheet for TravelCare Service Program Condition of your TravelCare Service Program