NEC A1160 manual System Clocks, Expressscope Monitor

Page 35

System Clocks

System Clocks

A clock synthesizer on the main logic module is the master clock source. This source provides a number of output clocks that are further distributed to the system components as needed.

The clock distribution system is self-contained within each cell. Systems with multiple cells do not provide redundant system clocks.

EXPRESSSCOPE® Monitor

Each cell contains an EXPRESSSCOPE® Monitor on the front of the cell. The EXPRESSSCOPE® Monitor provides a control and display interface (LCD) for the cell and the partition containing that cell. It is primarily used to

yView and update network settings for the partition.

yView and update network settings for the cell.

yEnable the trusted platform module (TPM) physically present attribute. The EXPRESSSCOPE® Monitor consists of

yLCD display screen of four lines that are 20 characters each.

yNavigation buttons (up, down, left, and right) and a selection button (OK).

yPower button.

yCell identification (ID) button that specifies the cell in the display screen and lights the cell ID LED on the back of the cell. The ID button on either the front or back of the cell turns off the chassis identification.

yTwo LEDs-a cell status LED that is used by management firmware and a Service Processor fault LED that is used by the power subsystem.

Figure 2-13 illustrates the EXPRESSSCOPE® Monitor.

2-17

Image 35
Contents Technical Overview ƒ EXPRESS5800/A1160December Proprietary Notice and Liability DisclaimerContents Contents Figures Page Vii TablesPage Who Should Use This Guide Using This GuidePage Safety Notices Safety NoticesPage Safety Notices for Users Outside of the U.S.A. and Canada Page Scalable Symmetric Multiprocessing Servers Documentation UpdatesWindows Operating Systems Operating SystemsOperating Systems Linux Operating Systems Virtual Machine MonitorsVirtual Machine Monitors Page Express5800/A1160 Cell Cell ComponentProcessors ProcessorsProcessor Sockets Extended Memory 64 Technology EM64T Supported ProcessorsRules for Mixing Processors Multicore ProcessorsNode Controller Processor Voltage Regulator ModulesMemory MemoryMemory Boards Dimm Slot NumberingDimm Capacity and Cell Memory Dimm Capacity and Cell MemoryRules for Memory Expansion Memory Mirroring Indicators on the Memory BoardSubsystem Dynamic Dimm SparingI/O Riser Board PCIe Card CarrierPCIe Card Carrier PortsPorts on Back of the Cell Inbuilt RAID ControllerPower Control PowerPower AC/DC Power SuppliesCooling Partitions and PowerUninterruptible Power Supply UPS Volt Redundancy and AC Source OptionsCooling Peripherals PeripheralsExternal Peripherals Boot OptionsSystem Clocks System ClocksExpressscope Monitor Device Names on the Expressscope Monitor LCD Fault Messages on the Expressscope Monitor LCDFault Messages on the Expressscope Monitor LCD CRU For More Information Inbuilt VirtualizationTrusted Platform Module TPM Inbuilt VirtualizationCell Interconnect and Multiple Cell Systems System ConfigurationSystem with Two Cells Cell Interconnect and Multiple Cell SystemsRelation of Interconnect Port and Cable End to Cell ID Cell IdentificationSystem Serial Number Cell IdentificationCabinets CabinetsPartitions PartitionsClustering Clustering Software Redundant ConfigurationsRedundant Configurations Replaceable ComponentsMinimum and Maximum Configurations Express5800/A1160 Configuration SummaryExpress5800/A1160 Configuration Summary Page System Components Server ManagementNetwork Components Console Manager Client Software Windows Domain ControllerManagement Server Client WorkstationMain Components Management ArchitectureIntelligent Platform Management Interface Management Board Management BoardFirmware Hub Service ProcessorPorts Remote Console InterfacesRemote Console Interfaces Trusted Platform Module TPMServer Management Software BiosManagement Software Components Management Software ComponentsEsmpro Manager and Agent Remote Monitoring Accessing Remote MonitoringComponents on the Front of a Cell Cell ComponentsLCD Components on the Rear of a CellComponents on the Rear of a Cell AC power cord