NEC A1160 manual Components on the Rear of a Cell

Page 59

Components on the Rear of a Cell

Figure A-1 Rear of the Cell

Table A-2 Component on the Rear of the Cell

Component	Description
PCIe carrier/cards	Six hot-plug switched PCIe 8x card slots. Slots 1 and 4 can
	support full-length cards. Each PCIe card is housed in an
	individual carrier.
Cell ID	An LED that is lit when the ID button on the
	EXPRESSSCOPE® Monitor is pressed. Press the cell ID
	button on the rear of the cell to turn off the light.
Partition USB ports	Two universal serial bus (USB) 2.0 ports.
Management serial port	A 9-pin serial port for the management board.
Partition serial port	A 9-pin serial port for the operating system.
Maintenance LAN port	An RJ45 port that provides a 10/100 Mbps Ethernet network
	connection to the maintenance LAN.
Partition video port	A 15-pin SVGA port.
USB management port	A USB 2.0 port for use with the management board.
Partition LAN ports	Two RJ45 ports that provide 10/100/1000 Mbps Ethernet
	network connections for the operating system. These ports
	are typically connected to the public LAN.
Navigation buttons	Enables the selection of EXPRESSSCOPE® Monitor menu
	options.

A-3

Image 59

Contents Technical Overview ƒ EXPRESS5800/A1160December Proprietary Notice and Liability DisclaimerContents Contents Figures Page Vii TablesPage Who Should Use This Guide Using This GuidePage Safety Notices Safety NoticesPage Safety Notices for Users Outside of the U.S.A. and Canada Page Scalable Symmetric Multiprocessing Servers Documentation UpdatesWindows Operating Systems Operating SystemsOperating Systems Linux Operating Systems Virtual Machine MonitorsVirtual Machine Monitors Page Express5800/A1160 Cell Cell ComponentProcessors ProcessorsProcessor Sockets Extended Memory 64 Technology EM64T Supported ProcessorsRules for Mixing Processors Multicore ProcessorsNode Controller Processor Voltage Regulator ModulesMemory MemoryMemory Boards Dimm Slot NumberingDimm Capacity and Cell Memory Dimm Capacity and Cell MemoryRules for Memory Expansion Memory Mirroring Indicators on the Memory BoardSubsystem Dynamic Dimm SparingI/O Riser Board PCIe Card CarrierPCIe Card Carrier PortsPorts on Back of the Cell Inbuilt RAID ControllerPower Control PowerPower AC/DC Power SuppliesCooling Partitions and PowerUninterruptible Power Supply UPS Volt Redundancy and AC Source OptionsCooling Peripherals PeripheralsExternal Peripherals Boot OptionsSystem Clocks System ClocksExpressscope Monitor Device Names on the Expressscope Monitor LCD Fault Messages on the Expressscope Monitor LCDFault Messages on the Expressscope Monitor LCD CRU For More Information Inbuilt VirtualizationTrusted Platform Module TPM Inbuilt VirtualizationCell Interconnect and Multiple Cell Systems System ConfigurationSystem with Two Cells Cell Interconnect and Multiple Cell SystemsRelation of Interconnect Port and Cable End to Cell ID Cell IdentificationSystem Serial Number Cell IdentificationCabinets CabinetsPartitions PartitionsClustering Clustering Software Redundant ConfigurationsRedundant Configurations Replaceable ComponentsMinimum and Maximum Configurations Express5800/A1160 Configuration SummaryExpress5800/A1160 Configuration Summary Page System Components Server ManagementNetwork Components Console Manager Client Software Windows Domain ControllerManagement Server Client WorkstationMain Components Management ArchitectureIntelligent Platform Management Interface Management Board Management BoardFirmware Hub Service ProcessorPorts Remote Console InterfacesRemote Console Interfaces Trusted Platform Module TPMServer Management Software BiosManagement Software Components Management Software ComponentsEsmpro Manager and Agent Remote Monitoring Accessing Remote MonitoringComponents on the Front of a Cell Cell ComponentsLCD Components on the Rear of a CellComponents on the Rear of a Cell AC power cord