Connecting the Console Monitor
Perform the following steps to connect the console monitor to the concentrator.
1.The keyboard, mouse, and video display cables attach to the first group of connectors on the left of the concentrator when viewed from the rear. See Figure
2.The
Note: If necessary, you can use
One | Two | Three | Four | Five | Six | Seven | Eight |
A
One
Reset
K MK M
Figure 5-15. Connecting Cables to the Port Concentrator
Connecting Servers (BSUs) to the Concentrator
1.Connect the keyboard, mouse, and video display cable from each server to one of the concentrator connector groups labeled one through eight. See Figure
2.Attach the AC power cord to the receptacle located next to the power on/off switch on the right side of the concentrator when viewed from the rear. Connect the other end of this power cord to the PDU or UPS.