Sawgrass Technologies, Inc. ChromaBlast™ Getting Started Guide for the EPSON Stylus C120/c110
Quick Connect II™ Set-up for the C120/C110
Check to ensure that you have all of the components necessary to setup your Quick Connect II™ system.
Components
1.Bulk Ink Dampers + tubes
2.Plastic Arm with Velcro adhesive
3.4 plastic syringes for priming
4.3 plastic dividers
5.ChromaBlast C120/C110 CD
6.QuickConnect Box
7.ChromaBlast Ink bags(not included with QuickConnect system)
8.Printer
1.Remove the soft protective cap from each ink bag. Depress the metal tab on the inside of the Quick Connect box and insert the plastic ink valve into place. Release the metal tab to lock the bag into place. Insert the black plastic dividers to separate between the four ink bags.
Note— There are 5 (five) bulk ink dampers, but only 4 ink bags. Two dampers are supplied by the Black ink bag. The Black ink bag has a “Y” tube splitter that fills both black ink dampers.
2.Set the bulk ink dampers face down on a flat surface with the round openings facing up. Pierce the thin plastic tab that covers the opening using the tip of a sharp object such as a ball point pen. Firmly insert the tip of the plastic
syringe into the gasketed round opening until the tip is completely inserted.
Note – The plunger needs to be pushed in and completely inserted into the syringe.
10