Sawgrass Technologies, Inc. ChromaBlast™ Getting Started Guide for the EPSON Stylus C120/c110
9.Place the new ink cartridge into the cartridge holder and push it down until it clicks into place.
10.Once the ChromaBlast cartridges are in place, close the ink cartridge cover and press it until it clicks into place.
11.Close the printer cover.
12.Press the ink button for one second. The printer begins charging ink and the power light starts flashing. This takes about 1 ½ minutes. When it’s finished, the power light stops flashing and remains on, and the ink light goes out.
Never turn off the printer while the power light is flashing or you’ll waste ink.
If the ink light stays on (not flashing), the ink cartridge may not be installed correctly. Press the ink button again and reinstall the ink cartridge until it clicks into place.
20